Tndeer Logo

Page all of 7 12345>Last »
Topic Options
#3159218 - 02/10/13 09:23 PM im torn dont know what to do
Deer Assassin
Non-Typical


Registered: 08/01/03
Posts: 88400
Loc: Kingston Springs

Offline
this week im installing 33 spline strange axles full spool in the race car

but also going from 26 to 28 inch tires

should i stay with 4.10 gear or go with my 4.56 i have


also thinking of going 4.30
_________________________
Drag Racing

Spending money I dont have

on things I dont need

to impress people I dont know

Top
#3159222 - 02/10/13 09:32 PM Re: im torn dont know what to do [Re: Deer Assassin]
Jon
TnDeer Old Timer
8 Point


Registered: 08/05/99
Posts: 1873
Loc: Warren co.

Offline
Changing from 26 inch tires to 28 will make your 410 gear act like a
380 gear.

Top
#3159230 - 02/10/13 09:37 PM Re: im torn dont know what to do [Re: Jon]
SilverFox
12 Point


Registered: 10/16/10
Posts: 5418
Loc: Kodak TN

Offline
4.56 1/8 and 4.30 1/4
_________________________
Know God, know peace. No God, no peace!

Top
#3159235 - 02/10/13 09:39 PM Re: im torn dont know what to do [Re: SilverFox]
Jon
TnDeer Old Timer
8 Point


Registered: 08/05/99
Posts: 1873
Loc: Warren co.

Offline
You should be ok with 456 on a 28 if you ran 26 on a 410 it will turn a few more rpm but not a lot.
Top
#3159238 - 02/10/13 09:40 PM Re: im torn dont know what to do [Re: SilverFox]
Whitehorse
TnDeer Old Timer
16 Point


Registered: 08/23/99
Posts: 10669
Loc: Pegram TN USA

Offline
Heck if I know... \:\)
_________________________
The greatest among you will be servant of all

Top
#3159243 - 02/10/13 09:43 PM Re: im torn dont know what to do [Re: Whitehorse]
Jon
TnDeer Old Timer
8 Point


Registered: 08/05/99
Posts: 1873
Loc: Warren co.

Offline
A 4:30 on 28 tires in going to act like a 4:00 in comparison to 4:10 on 26 inch tires. I would go with 4:56 unless you are currently close to overrev.
Top
#3159246 - 02/10/13 09:46 PM Re: im torn dont know what to do [Re: Jon]
Jon
TnDeer Old Timer
8 Point


Registered: 08/05/99
Posts: 1873
Loc: Warren co.

Offline
But as I was always taught about racing from the old timers, throw the tach away. If it won't take it you don't need it lol.
Top
#3159259 - 02/10/13 10:00 PM Re: im torn dont know what to do [Re: SilverFox]
Deer Assassin
Non-Typical


Registered: 08/01/03
Posts: 88400
Loc: Kingston Springs

Offline
 Originally Posted By: SilverFox
4.56 1/8 and 4.30 1/4


thats the problem



i agree 100 % with the rpms i want to turn


i run 1/8 99.9999% if i do the 4.56 i can run the 1/4 id be at about 6500

now i have turned her to 65 plenty of time i just prefer not to


now if i run 4.30 if a wild hair comes up i could run the 1/4

but i dont have a 4.30

of course i could leave the 4.10 in and with the 28 it would be similar to my 26 when i had 3.73



i have almost come to the conclusion screw it dont fear the gear i hardly ever go run the 1/4 i will prolly run the 4.56
_________________________
Drag Racing

Spending money I dont have

on things I dont need

to impress people I dont know

Top
#3159260 - 02/10/13 10:00 PM Re: im torn dont know what to do [Re: Jon]
Deer Assassin
Non-Typical


Registered: 08/01/03
Posts: 88400
Loc: Kingston Springs

Offline
 Originally Posted By: Jon
But as I was always taught about racing from the old timers, throw the tach away. If it won't take it you don't need it lol.
lol
_________________________
Drag Racing

Spending money I dont have

on things I dont need

to impress people I dont know

Top
#3159265 - 02/10/13 10:03 PM Re: im torn dont know what to do [Re: Deer Assassin]
redblood
16 Point


Registered: 01/22/06
Posts: 15381
Loc: Lewisburg

Offline
 Originally Posted By: Deer Assassin
this week im installing 33 spline strange axles full spool in the race car

but also going from 26 to 28 inch tires

should i stay with 4.10 gear or go with my 4.56 i have


also thinking of going 4.30



dang DA. that has to be an expensive hobby. sounds more costly than hunting!!
_________________________
"I will predator hunt for food "

Top
#3159294 - 02/10/13 10:44 PM Re: im torn dont know what to do [Re: redblood]
mr.big
Non-Typical


Registered: 01/03/01
Posts: 28915
Loc: Copper Head Road

Offline
try it with the gears in the car and go from there
_________________________
gun junky

Top
#3159418 - 02/11/13 07:23 AM Re: im torn dont know what to do [Re: redblood]
TeamMainStreet
10 Point


Registered: 08/30/07
Posts: 2629
Loc: Union County,Tn

Offline
Quick change and run whatever whenever.
_________________________
The work is mighty hard out in the gravel yard. I'll never be a free man so they say

Dont tread on me



Top
#3159420 - 02/11/13 07:28 AM Re: im torn dont know what to do [Re: TeamMainStreet]
Treestand Troubadour
4 Point


Registered: 11/11/11
Posts: 382
Loc: Carter County

Offline
 Originally Posted By: TeamMainStreet
Quick change and run whatever whenever.

they are a thing of beauty if your pockets are deep enough for one
_________________________
And there she was.... corndog in one hand, budweiser in the other. it was perfect

Top
#3159485 - 02/11/13 08:31 AM Re: im torn dont know what to do [Re: Treestand Troubadour]
fredfred
8 Point


Registered: 06/24/12
Posts: 1945
Loc: crossville, tn

Offline
What transmission? If your running a PG the 4.56 will be fine N/A. But if your running a 3 speed it might be hard to control wheel spin at the hit. Mine with a PG, 4.10 and a 28" tire would turn 6500 in the 1/8 NA and 7600 with a 150 shot. Thats all with a fairly loose converter flashing 5400 and shifting a 6800
_________________________
AKA: Luke Sky Dumper

Democrats and liberals have turned our country into a bunch of SISSYS

Top
#3159489 - 02/11/13 08:35 AM Re: im torn dont know what to do [Re: Treestand Troubadour]
fredfred
8 Point


Registered: 06/24/12
Posts: 1945
Loc: crossville, tn

Offline
 Originally Posted By: Treestand Troubadour
 Originally Posted By: TeamMainStreet
Quick change and run whatever whenever.

they are a thing of beauty if your pockets are deep enough for one


Your pockets are never deep enough in Drag racing
_________________________
AKA: Luke Sky Dumper

Democrats and liberals have turned our country into a bunch of SISSYS

Top
#3159502 - 02/11/13 08:42 AM Re: im torn dont know what to do [Re: redblood]
HuntingDicksonDTC
8 Point


Registered: 11/09/06
Posts: 2486
Loc: Dickson

Offline
Its alot more expensive than hunting - have owned several bracket cars & they eat $100 bills at a fast pace

 Originally Posted By: redblood
 Originally Posted By: Deer Assassin
this week im installing 33 spline strange axles full spool in the race car

but also going from 26 to 28 inch tires

should i stay with 4.10 gear or go with my 4.56 i have


also thinking of going 4.30



dang DA. that has to be an expensive hobby. sounds more costly than hunting!!
_________________________
Treat a man as he is & he will remain as he is.

Treat a man as he could be & he will become what he should be.

Top
#3159532 - 02/11/13 09:10 AM Re: im torn dont know what to do [Re: HuntingDicksonDTC]
h60m
Button


Registered: 12/19/12
Posts: 3
Loc: Middle TN

Offline
I would put the 4.56 in. What engine and trans are you running? How much power/ tq, and how heavy is the car? What E.T. does it normally run, and what do your 60 ft times look like?
Top
#3159537 - 02/11/13 09:13 AM Re: im torn dont know what to do [Re: h60m]
h60m
Button


Registered: 12/19/12
Posts: 3
Loc: Middle TN

Offline
I grew up working at a local speed shop in east tn before joining the army so this sort of stuff is right down my alley.
Top
#3159593 - 02/11/13 10:02 AM Re: im torn dont know what to do [Re: h60m]
Deer Assassin
Non-Typical


Registered: 08/01/03
Posts: 88400
Loc: Kingston Springs

Offline
387 ci (393 but stock bore) c-4

no idea weight id guess 3250 with me in it

never had it on dyno runs 7.30's 93 mph NA in 1/8

but that is with 26 inch tires and 3.73 gears spining a lil 1.59 -1.60 60 foot when i went 4.10 gear and 26 she spun more go figure
_________________________
Drag Racing

Spending money I dont have

on things I dont need

to impress people I dont know

Top
#3159625 - 02/11/13 10:29 AM Re: im torn dont know what to do [Re: redblood]
DBLAARCHERY
Woodpile Boys Neighbor
14 Point


Registered: 11/16/08
Posts: 9510
Loc: Cannon County Outback

Offline
This is like talking to Lade about reloading...He starts talking spanglish real quick! \:D
_________________________
BEWARE OF THE KIDS, THEY EAT EVERYTHING I Shoot!

Give a man a fish and he will eat for a day...Teach him how to fish and he will sit on a boat and drink beer all day!

Top
#3159880 - 02/11/13 02:18 PM Re: im torn dont know what to do [Re: DBLAARCHERY]
Deer Assassin
Non-Typical


Registered: 08/01/03
Posts: 88400
Loc: Kingston Springs

Offline
naw it is in english


redneck version for sure
_________________________
Drag Racing

Spending money I dont have

on things I dont need

to impress people I dont know

Top
#3159881 - 02/11/13 02:19 PM Re: im torn dont know what to do [Re: DBLAARCHERY]
Doe-lusional
16 Point


Registered: 01/27/07
Posts: 14460
Loc: Kingston Springs

Offline
 Originally Posted By: DBLAARCHERY
This is like talking to Lade about reloading...He starts talking spanglish real quick! \:D
You aint freakin lying!!!
_________________________
If ya ain't first..... Your last!!!

Top
#3159886 - 02/11/13 02:22 PM Re: im torn dont know what to do [Re: Deer Assassin]
leader
16 Point


Registered: 08/10/06
Posts: 11641
Loc: Knox

Offline
Chinese to me but I love it....
_________________________
THE ONLY DUMB QUESTIONS ARE THOSE NEVER ASKED!

Top
#3159969 - 02/11/13 04:16 PM Re: im torn dont know what to do [Re: leader]
fredfred
8 Point


Registered: 06/24/12
Posts: 1945
Loc: crossville, tn

Offline
With a C4 and a 4.56 you'll have a ton of wheel speed at the hit. I'd go for the 4.10's or get a PG

Edited by fredfred (02/11/13 04:17 PM)
_________________________
AKA: Luke Sky Dumper

Democrats and liberals have turned our country into a bunch of SISSYS

Top
#3159998 - 02/11/13 04:56 PM Re: im torn dont know what to do [Re: fredfred]
marlin45/70
4 Point


Registered: 10/26/08
Posts: 173
Loc: Lenoir City, Tn

Offline
We ran a Monza with a 400 small block, Powerglide transmission and 29 inch slick, and we ran a 488 but we did turn high RPM'S.It's been so long i can't remember exactly the rpm ( i'm wanting to think around 6800 in the 1/8 mile. We did go through a time with spinning badly, but new coil overs with the correct springs and four link took care of that. Oh the Good ole days!!!!!!
_________________________
Courage is being scared to death and saddling up anyway. John Wayne

Top
#3160504 - 02/11/13 10:55 PM Re: im torn dont know what to do [Re: marlin45/70]
Deer Assassin
Non-Typical


Registered: 08/01/03
Posts: 88400
Loc: Kingston Springs

Offline
well got the pos unit out axles out axle bearings out drive shaft out ring gear mounted to spool going to press pinion bearing off at shop (work) in the am and press it on 4.56 pinion


still got to cut axle tubes and put every thing back in



good times
_________________________
Drag Racing

Spending money I dont have

on things I dont need

to impress people I dont know

Top
#3160505 - 02/11/13 10:56 PM Re: im torn dont know what to do [Re: fredfred]
Deer Assassin
Non-Typical


Registered: 08/01/03
Posts: 88400
Loc: Kingston Springs

Offline
 Originally Posted By: fredfred
With a C4 and a 4.56 you'll have a ton of wheel speed at the hit. I'd go for the 4.10's or get a PG



if that happens i will go to a 4.30 or 4.33


but im going to gamble on 4.56
_________________________
Drag Racing

Spending money I dont have

on things I dont need

to impress people I dont know

Top
#3161949 - 02/13/13 01:09 AM Re: im torn dont know what to do [Re: DBLAARCHERY]
h60m
Button


Registered: 12/19/12
Posts: 3
Loc: Middle TN

Offline
Ok.....if you spun more when you put the 4:10 in you have a suspension issue. At 95 mph you should easily run high 6.90s. That c4 has a low first gear and when you installed the 4.10 you started shocking the tires on the starting line. It will be way worse with the 4.56. Ideally you need a 29x9.5 tire with that 4.56 combined with moroso trick springs/ and 90/10 drag shocks in the front to make the front end flip up and transfer weight to the rear. Best case with a good suspension and stars and planets aligned it *should* be running low 6.90s to high 6.80s. Pm me if you would like to talk more on this, id be glad to help!
Top
#3162273 - 02/13/13 10:15 AM Re: im torn dont know what to do [Re: h60m]
fredfred
8 Point


Registered: 06/24/12
Posts: 1945
Loc: crossville, tn

Offline
I tried a 3 speed and 4.56s with 28" tires and it would absolutly blow the tires off of it at the hit. That was a 4 link car with adjustable coil overs. I changer to a 31x10.5W to stop the spinning but would drag the bumper if the air was good LoL

Edited by fredfred (02/13/13 10:16 AM)
_________________________
AKA: Luke Sky Dumper

Democrats and liberals have turned our country into a bunch of SISSYS

Top
#3162569 - 02/13/13 02:32 PM Re: im torn dont know what to do [Re: fredfred]
Deer Assassin
Non-Typical


Registered: 08/01/03
Posts: 88400
Loc: Kingston Springs

Offline
my 26 inch tires were 8 wide these will be 28x10.5 10 inch wide


my suspension problems are this

i have strange 10 ways on rear upr double adjustable uppers and single adjustable lca's along wit ARB

my front struts are just wore out factory i get great lift but the front end falls back quick
_________________________
Drag Racing

Spending money I dont have

on things I dont need

to impress people I dont know

Top
#3162618 - 02/13/13 02:57 PM Re: im torn dont know what to do [Re: Deer Assassin]
fredfred
8 Point


Registered: 06/24/12
Posts: 1945
Loc: crossville, tn

Offline
That will be plenty for a stock suspention mustang with the power level your working with. Your problem is gonna be a 2.46 1st gear, 4.56 rear gear and a 28" tire. I tried that exact combo and could not control the wheel spin at the hit. Thats tractor gears when you put it all together
_________________________
AKA: Luke Sky Dumper

Democrats and liberals have turned our country into a bunch of SISSYS

Top
#3162670 - 02/13/13 03:23 PM Re: im torn dont know what to do [Re: fredfred]
fredfred
8 Point


Registered: 06/24/12
Posts: 1945
Loc: crossville, tn

Offline
And your converter is going to flash quite a bit higher now. So you may have to change your shift points
_________________________
AKA: Luke Sky Dumper

Democrats and liberals have turned our country into a bunch of SISSYS

Top
#3162690 - 02/13/13 03:48 PM Re: im torn dont know what to do [Re: fredfred]
Deer Assassin
Non-Typical


Registered: 08/01/03
Posts: 88400
Loc: Kingston Springs

Offline
well my converter flash 5g from 2g foot brake when i use trans brake i launch 3500


i only shift at 5900 i dont care to run her harder than that
_________________________
Drag Racing

Spending money I dont have

on things I dont need

to impress people I dont know

Top
#3162698 - 02/13/13 03:57 PM Re: im torn dont know what to do [Re: Deer Assassin]
fredfred
8 Point


Registered: 06/24/12
Posts: 1945
Loc: crossville, tn

Offline
5900? And your converter flashes 5000. How much rpm drop do you get at the shift? Turn that puppy up a little sounds like you should have alot left in her

Well if you have the cam for it that is


Edited by fredfred (02/13/13 04:01 PM)
_________________________
AKA: Luke Sky Dumper

Democrats and liberals have turned our country into a bunch of SISSYS

Top
#3163138 - 02/13/13 08:55 PM Re: im torn dont know what to do [Re: fredfred]
Deer Assassin
Non-Typical


Registered: 08/01/03
Posts: 88400
Loc: Kingston Springs

Offline
 Originally Posted By: fredfred
5900? And your converter flashes 5000. How much rpm drop do you get at the shift? Turn that puppy up a little sounds like you should have alot left in her

Well if you have the cam for it that is


that is my problem


dont have enuff cam

540/560

the engine is like 12:1 it has 5.0 flat top pistons zero deck height 60 cc head

I know the fella the built it he did block work with a die grinder cut skirts off pistons and hand cut valve reliefs in the pistons i thought he was bs ing me till i have to pull the heads last year

i just dont thing i can get a bigger cam due to valve clearance

id like to put a solid roller in it
_________________________
Drag Racing

Spending money I dont have

on things I dont need

to impress people I dont know

Top
#3163180 - 02/13/13 09:14 PM Re: im torn dont know what to do [Re: Deer Assassin]
fredfred
8 Point


Registered: 06/24/12
Posts: 1945
Loc: crossville, tn

Offline
WOW gotta love knowing you've got a grenade under the hood
A stock SBF can still take 7500 for a little while LOL I say send it out in a blaze of glory \:D
_________________________
AKA: Luke Sky Dumper

Democrats and liberals have turned our country into a bunch of SISSYS

Top
#3163238 - 02/13/13 09:50 PM Re: im torn dont know what to do [Re: fredfred]
Deer Assassin
Non-Typical


Registered: 08/01/03
Posts: 88400
Loc: Kingston Springs

Offline
going on its 3rd year hard racing

holding up fine
_________________________
Drag Racing

Spending money I dont have

on things I dont need

to impress people I dont know

Top
#3163905 - 02/14/13 12:39 PM Re: im torn dont know what to do [Re: Deer Assassin]
fredfred
8 Point


Registered: 06/24/12
Posts: 1945
Loc: crossville, tn

Offline
It's time then
_________________________
AKA: Luke Sky Dumper

Democrats and liberals have turned our country into a bunch of SISSYS

Top
#3163916 - 02/14/13 12:53 PM Re: im torn dont know what to do [Re: fredfred]
Deer Assassin
Non-Typical


Registered: 08/01/03
Posts: 88400
Loc: Kingston Springs

Offline
naw its a ford it will run forever
_________________________
Drag Racing

Spending money I dont have

on things I dont need

to impress people I dont know

Top
#3163936 - 02/14/13 01:16 PM Re: im torn dont know what to do [Re: Deer Assassin]
fredfred
8 Point


Registered: 06/24/12
Posts: 1945
Loc: crossville, tn

Offline
Haha yeah boy
_________________________
AKA: Luke Sky Dumper

Democrats and liberals have turned our country into a bunch of SISSYS

Top
#3164096 - 02/14/13 04:01 PM Re: im torn dont know what to do [Re: Deer Assassin]
Doe-lusional
16 Point


Registered: 01/27/07
Posts: 14460
Loc: Kingston Springs

Offline
 Originally Posted By: Deer Assassin
naw its a ford it will run forever

AMEN!! ti would be a complete different story if it were one of them Chevy's. It would have done been retired!! lol!
_________________________
If ya ain't first..... Your last!!!

Top
#3164200 - 02/14/13 05:50 PM Re: im torn dont know what to do [Re: Doe-lusional]
fredfred
8 Point


Registered: 06/24/12
Posts: 1945
Loc: crossville, tn

Offline
Hey I hope it does stay together forever but I used to believe in Santa Clause too \:D Hell I'd be afraid to start it after saying it would run forever
_________________________
AKA: Luke Sky Dumper

Democrats and liberals have turned our country into a bunch of SISSYS

Top
#3164213 - 02/14/13 06:12 PM Re: im torn dont know what to do [Re: fredfred]
Doe-lusional
16 Point


Registered: 01/27/07
Posts: 14460
Loc: Kingston Springs

Offline
what do you mean you "USED" to believe in Santa Clause?!?!?! Thats so very wrong!
_________________________
If ya ain't first..... Your last!!!

Top
#3164226 - 02/14/13 06:21 PM Re: im torn dont know what to do [Re: Doe-lusional]
Coach
16 Point


Registered: 12/02/07
Posts: 11380
Loc: Pall Mall, TN and Dexter, MI

Offline
Dang, I saw this and thought it was like...a country song or blues song or somethin....

I'm torn and don't know what to do
My woman done said we're through
I'm hoping and prayin
Till my heart breaks right in two
I got the DA Doelusional blues


Edited by Coach (02/14/13 06:30 PM)
_________________________
I couldn't fix your brakes so I made your horn louder....

Dean Business Supply, Llc

http://www.adam4d.com




Top
#3164266 - 02/14/13 06:50 PM Re: im torn dont know what to do [Re: Coach]
Doe-lusional
16 Point


Registered: 01/27/07
Posts: 14460
Loc: Kingston Springs

Offline
coach your too funny!!!
_________________________
If ya ain't first..... Your last!!!

Top
#3164304 - 02/14/13 07:26 PM Re: im torn dont know what to do [Re: ]
Doe-lusional
16 Point


Registered: 01/27/07
Posts: 14460
Loc: Kingston Springs

Offline
nope drag strip
_________________________
If ya ain't first..... Your last!!!

Top
#3164469 - 02/14/13 09:57 PM Re: im torn dont know what to do [Re: ]
fredfred
8 Point


Registered: 06/24/12
Posts: 1945
Loc: crossville, tn

Offline
 Originally Posted By: Buckykm1
what is the heads torked to


This is about to get interesting
_________________________
AKA: Luke Sky Dumper

Democrats and liberals have turned our country into a bunch of SISSYS

Top
#3164480 - 02/14/13 10:09 PM Re: im torn dont know what to do [Re: ]
TeamMainStreet
10 Point


Registered: 08/30/07
Posts: 2629
Loc: Union County,Tn

Offline
 Originally Posted By: Buckykm1
what is the heads torked to


What does head torque have to do with gear ratio?
_________________________
The work is mighty hard out in the gravel yard. I'll never be a free man so they say

Dont tread on me



Top
#3164504 - 02/14/13 10:38 PM Re: im torn dont know what to do [Re: TeamMainStreet]
Deer Assassin
Non-Typical


Registered: 08/01/03
Posts: 88400
Loc: Kingston Springs

Offline
i torqued the heads to 3 grunts cause there aluminum if they were cast 4 grunts
_________________________
Drag Racing

Spending money I dont have

on things I dont need

to impress people I dont know

Top
#3164506 - 02/14/13 10:41 PM Re: im torn dont know what to do [Re: Deer Assassin]
Deer Assassin
Non-Typical


Registered: 08/01/03
Posts: 88400
Loc: Kingston Springs

Offline
diff all done

no leaks
good pattern
back lash .009

no leaks on c clip eleminators


sat it will be time to start front end
_________________________
Drag Racing

Spending money I dont have

on things I dont need

to impress people I dont know

Top
#3164889 - 02/15/13 10:49 AM Re: im torn dont know what to do [Re: Deer Assassin]
Doe-lusional
16 Point


Registered: 01/27/07
Posts: 14460
Loc: Kingston Springs

Offline
 Originally Posted By: Deer Assassin
diff all done

no leaks
good pattern
back lash .009

no leaks on c clip eleminators


sat it will be time to start front end

Glad you got to spend Valentines with the one you LOVE!! lol!! \:D ;\)
_________________________
If ya ain't first..... Your last!!!

Top
#3164947 - 02/15/13 11:33 AM Re: im torn dont know what to do [Re: redblood]
Poleaxe
8 Point


Registered: 09/08/12
Posts: 2387
Loc: Etowah Tennessee

Offline
Just keep it between the mayonaise and mustard. Thats all I know.
Top
#3164970 - 02/15/13 11:44 AM Re: im torn dont know what to do [Re: redblood]
89cherokeelimited
6 Point


Registered: 08/13/11
Posts: 838
Loc: TN, Sumner, Hendersonville

Offline
I put 4.56 in my XJ for offroading and LOVE them! Randy's Ring and Pinion from online was awesome!
I ordered them at noon on a Thursday and they come Friday afternoon.
I think they are form Chattanooga or something.
Great prices too.
_________________________
It has become appallingly obvious that our technology has exceeded our humanity.
Albert Einstein

Top
#3165091 - 02/15/13 01:20 PM Re: im torn dont know what to do [Re: Doe-lusional]
Deer Assassin
Non-Typical


Registered: 08/01/03
Posts: 88400
Loc: Kingston Springs

Offline
 Originally Posted By: Doe-lusional
 Originally Posted By: Deer Assassin
diff all done

no leaks
good pattern
back lash .009

no leaks on c clip eleminators


sat it will be time to start front end

Glad you got to spend Valentines with the one you LOVE!! lol!! \:D ;\)


i love that ole car
_________________________
Drag Racing

Spending money I dont have

on things I dont need

to impress people I dont know

Top
#3165422 - 02/15/13 06:38 PM Re: im torn dont know what to do [Re: Deer Assassin]
fredfred
8 Point


Registered: 06/24/12
Posts: 1945
Loc: crossville, tn

Offline
Whatcha got in mind for the front end?
_________________________
AKA: Luke Sky Dumper

Democrats and liberals have turned our country into a bunch of SISSYS

Top
#3165518 - 02/15/13 07:56 PM Re: im torn dont know what to do [Re: Deer Assassin]
Doe-lusional
16 Point


Registered: 01/27/07
Posts: 14460
Loc: Kingston Springs

Offline
 Originally Posted By: Deer Assassin
 Originally Posted By: Doe-lusional
 Originally Posted By: Deer Assassin
diff all done

no leaks
good pattern
back lash .009

no leaks on c clip eleminators


sat it will be time to start front end

Glad you got to spend Valentines with the one you LOVE!! lol!! \:D ;\)


i love that ole car

Lord dont I know it!! Im shocked I got Valentines dinner, and the money didnt go for a part for her!! we know who the love of your life is!!!!
_________________________
If ya ain't first..... Your last!!!

Top
#3165600 - 02/15/13 09:20 PM Re: im torn dont know what to do [Re: fredfred]
Deer Assassin
Non-Typical


Registered: 08/01/03
Posts: 88400
Loc: Kingston Springs

Offline
 Originally Posted By: fredfred
Whatcha got in mind for the front end?


i picked up a flaming river manual steer rack and i am installing sn95 spindles to convert it to 5 lug and putting strange 10 ways struts on it


i get great squat on take off but it falls off quick all i have is worn factory struts
_________________________
Drag Racing

Spending money I dont have

on things I dont need

to impress people I dont know

Top
#3165759 - 02/16/13 06:06 AM Re: im torn dont know what to do [Re: Deer Assassin]
fredfred
8 Point


Registered: 06/24/12
Posts: 1945
Loc: crossville, tn

Offline
The UPR coil over kit is a nice piece if you need springs. Your 4 lug spindles will work with 5 lug ranger hubs you just have to mix the bearings. It was cheaper for me unless you already have the SN95 stuff. You'll have to grindvon the caliper a little that way though.
_________________________
AKA: Luke Sky Dumper

Democrats and liberals have turned our country into a bunch of SISSYS

Top
#3165955 - 02/16/13 09:15 AM Re: im torn dont know what to do [Re: fredfred]
Deer Assassin
Non-Typical


Registered: 08/01/03
Posts: 88400
Loc: Kingston Springs

Offline
i got the sn95 spindles and calipers and brake lines for free
_________________________
Drag Racing

Spending money I dont have

on things I dont need

to impress people I dont know

Top
#3165995 - 02/16/13 09:34 AM Re: im torn dont know what to do [Re: Deer Assassin]
fredfred
8 Point


Registered: 06/24/12
Posts: 1945
Loc: crossville, tn

Offline
Cant beat that
_________________________
AKA: Luke Sky Dumper

Democrats and liberals have turned our country into a bunch of SISSYS

Top
#3166008 - 02/16/13 09:46 AM Re: im torn dont know what to do [Re: fredfred]
Deer Assassin
Non-Typical


Registered: 08/01/03
Posts: 88400
Loc: Kingston Springs

Offline
well i bought a set of new slicks and new skinnies for front and new wheels for 500 with the sn95 spindles thrown in

then sold my old wheels for 425
_________________________
Drag Racing

Spending money I dont have

on things I dont need

to impress people I dont know

Top
#3166324 - 02/16/13 03:10 PM Re: im torn dont know what to do [Re: Deer Assassin]
fredfred
8 Point


Registered: 06/24/12
Posts: 1945
Loc: crossville, tn

Offline
 Originally Posted By: Deer Assassin
well i bought a set of new slicks and new skinnies for front and new wheels for 500 with the sn95 spindles thrown in

then sold my old wheels for 425






Nice
_________________________
AKA: Luke Sky Dumper

Democrats and liberals have turned our country into a bunch of SISSYS

Top
Page all of 7 12345>Last »


Moderator:  RUGER, Unicam, gtk, Tennessee Todd, Lakeland Charlie, Cuttin Caller, CBU93, stretch, TurkeyBurd, MAN, Bobby G, Kimber45, Crappie Luck 
Hop to:
Top Posters
4106599
RUGER
88400
Deer Assassin
65979
BSK
62020
Crappie Luck
51392
spitndrum
Newest Members
yarddawg54, schiesser, bigdoc, Bggamehunter, willy2763
13605 Registered Users
Who's Online
5 registered (easttntrapper, Rebel, Cumberlandriver, Bowtech Man, jameseboy) and 59 anonymous users online.
Forum Stats
13605 Members
43 Forums
100233 Topics
1180120 Posts

Max Online: 788 @ 11/11/13 08:06 PM
Moon Phase
CURRENT MOON
December
Su M Tu W Th F Sa
1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31
Forum Donations
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!

TN Burn Safe

Generated in 0.017 seconds in which 0.002 seconds were spent on a total of 14 queries. Zlib compression enabled.