Tndeer Logo

Page 2 of 3 <123>
Topic Options
#3145977 - 01/30/13 05:04 PM Re: Accurizing a stock 700? [Re: GOODWIN]
Rackseeker
12 Point


Registered: 09/26/02
Posts: 5799
Loc: Franklin County

Offline
I would start with a new stock, H-S would be a good choice for the money. I would have the barrel re crowned. Then a trigger job to 2.5 lbs., good bases and rings and good glass. Then handloads. That should get you started, then if that don't work. All you lack is a custom barrel.
_________________________
AKA: GLOCKMAN

Top
#3146203 - 01/30/13 08:01 PM Re: Accurizing a stock 700? [Re: GOODWIN]
WGK
WILD BILL
12 Point


Registered: 02/18/12
Posts: 6513
Loc: loudon

Offline
Don't forget to put some type of finish back on the wood where you sanded it. It needs to be sealed so it won't draw moisture.
_________________________
William G Kollock

Top
#3146376 - 01/30/13 09:38 PM Re: Accurizing a stock 700? [Re: WGK]
TNRifleman
8 Point


Registered: 01/06/08
Posts: 1709
Loc: Collierville

Offline
Practice a ton with a .22 that is similar in size to your 30-06. This has been the least expensive way for me to accuraize my big game rifles \:\) Oh and make sure that barrel is free floated.
Top
#3146476 - 01/30/13 11:51 PM Re: Accurizing a stock 700? [Re: TNRifleman]
Hunter 257W
10 Point


Registered: 10/04/12
Posts: 3522
Loc: Franklin County

Offline
Spending $25 on a Brownells Accuglass kit to glass bed it is a great "Bang for the Buck". I've done several rifles with varying results but they all have improved in accuracy to some degree. I don't think there is any other modification that gains as much for so little cost. Especially since you have already lightened the trigger and free floated the barrel.
Top
#3146730 - 01/31/13 10:07 AM Re: Accurizing a stock 700? [Re: Hunter 257W]
GOODWIN
4 Point


Registered: 02/18/08
Posts: 453
Loc: Chattanooga, TN

Offline
 Originally Posted By: Hunter 257W
Spending $25 on a Brownells Accuglass kit to glass bed it is a great "Bang for the Buck". I've done several rifles with varying results but they all have improved in accuracy to some degree. I don't think there is any other modification that gains as much for so little cost. Especially since you have already lightened the trigger and free floated the barrel.


thanks for the info. That's what I'll probably do next. Did you just do the action?

Top
#3146952 - 01/31/13 01:40 PM Re: Accurizing a stock 700? [Re: GOODWIN]
Tn_River_Ratt
4 Point


Registered: 07/18/11
Posts: 223
Loc: Hardeman, Tn

Offline
Check the crown of the barrel. Tightened up my groups more than anything.
_________________________
I would rather be tried by 12 than carried by 6.

Top
#3147080 - 01/31/13 03:49 PM Re: Accurizing a stock 700? [Re: Tn_River_Ratt]
GOODWIN
4 Point


Registered: 02/18/08
Posts: 453
Loc: Chattanooga, TN

Offline
 Originally Posted By: Tn_River_Ratt
Check the crown of the barrel. Tightened up my groups more than anything.


I'll do some research on this thanks. But how do you check the crown?

Top
#3147120 - 01/31/13 04:28 PM Re: Accurizing a stock 700? [Re: GOODWIN]
Hunter 257W
10 Point


Registered: 10/04/12
Posts: 3522
Loc: Franklin County

Offline
 Originally Posted By: GOODWIN
 Originally Posted By: Hunter 257W
Spending $25 on a Brownells Accuglass kit to glass bed it is a great "Bang for the Buck". I've done several rifles with varying results but they all have improved in accuracy to some degree. I don't think there is any other modification that gains as much for so little cost. Especially since you have already lightened the trigger and free floated the barrel.


thanks for the info. That's what I'll probably do next. Did you just do the action?


I always do the action including the rear tang and the chamber portion of the barrel. I've added pillars later to some guns while leaving others with just the epoxy. I don't think the pillars make that much difference in the short term but I'm sure they help in the long term by preventing compression of the stock material under the action screws.

Top
#3147216 - 01/31/13 06:06 PM Re: Accurizing a stock 700? [Re: Hunter 257W]
TiminTN
12 Point


Registered: 06/18/00
Posts: 6341
Loc: Memphis,Tennessee U.S.A.

Offline
Before polishing, from the factory



After polishing



_________________________
You cannot argue with STUPID

Top
#3147461 - 01/31/13 09:07 PM Re: Accurizing a stock 700? [Re: TiminTN]
GOODWIN
4 Point


Registered: 02/18/08
Posts: 453
Loc: Chattanooga, TN

Offline
Wow! I do see a big difference. Did you do the polishing yourself? If so explain your technique.
Top
Page 2 of 3 <123>


Moderator:  RUGER, Bobby G, Unicam, CBU93, stretch, TurkeyBurd, Kimber45, Mrs.Unicam, Crappie Luck, gtk 
Hop to:
Top Posters
4106599
RUGER
88400
Deer Assassin
65979
BSK
62020
Crappie Luck
51392
spitndrum
Newest Members
yarddawg54, schiesser, bigdoc, Bggamehunter, willy2763
13605 Registered Users
Who's Online
4 registered (Jimmy1320, Zulu, redheadshooter, tnbucs1) and 72 anonymous users online.
Forum Stats
13605 Members
43 Forums
100233 Topics
1180120 Posts

Max Online: 788 @ 11/11/13 08:06 PM
Moon Phase
CURRENT MOON
December
Su M Tu W Th F Sa
1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31
Forum Donations
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!

TN Burn Safe

Generated in 0.005 seconds in which 0.001 seconds were spent on a total of 15 queries. Zlib compression enabled.