Tndeer Logo

Page 1 of 3 123>
Topic Options
#3145235 - 01/30/13 08:23 AM Accurizing a stock 700?
GOODWIN
4 Point


Registered: 02/18/08
Posts: 453
Loc: Chattanooga, TN

Offline
I'd like to do some things to get better accuracy out of my 700 BDL 30-06 with laminate stock. First off I'd like to keep the factory look as much as possible because this was gun was a gift and has sentimental value. And I don't want to break the bank doin it. Just getting the itch to reach out there a little farther 500-600yds. Currently, I'm only getting 1" 1/2 groups at 100yds with factory loads. I'm looking to get some decent optics for it now. Really looking at the Vortex Viper 4-16X.

Other than quality glass and handloads, what else can I do to the gun? Looking for helpful tips or links to good websites. The barrel is not free-floated. Also in my google searches I've found a little info on bedding the action. And can I adjust the factory trigger myself with minimal gunsmithing knowledge? Thanks for any help I can get. I'm gonna make this my off-season project. I know I can get a lot of aftermarket custom things such as a barrel, trigger, stock, etc. but I'm really looking for ways to make the stock gun a better shooter.

Top
#3145256 - 01/30/13 08:38 AM Re: Accurizing a stock 700? [Re: GOODWIN]
Rubberduck270
10 Point


Registered: 11/01/10
Posts: 3007
Loc: Lawrence Co.

Offline
The sky's the limit on what all you can do to help accuracy. You can lap the recoil lugs, fire lap the bore, work up hand loads, trigger job or replacement trigger, etc.

I'd start with free floating the barrel and bedding the action. Then work on the trigger, then possible move to lapping the barrel and recoil lugs.

Midway USA has a few videos online that are pretty interesting to watch. He does a good job of explaining pillar and glass bedding. http://www.midwayusa.com/General.mvc/Index/VideoLibrary
_________________________
Smokeless Muzzleloading: It ain't your Grampa's flintlock

Top
#3145310 - 01/30/13 09:12 AM Re: Accurizing a stock 700? [Re: Rubberduck270]
Kimberman
10 Point


Registered: 10/30/05
Posts: 3543
Loc: Knoxville

Offline
Hand loading would be my first step. A good trigger helps too.
_________________________
So many smallmouth, so little time.

Top
#3145331 - 01/30/13 09:28 AM Re: Accurizing a stock 700? [Re: GOODWIN]
infoman jr.
10 Point


Registered: 10/05/03
Posts: 4387
Loc: Elizabethtown, KY

Offline
 Originally Posted By: GOODWIN
And can I adjust the factory trigger myself with minimal gunsmithing knowledge?

Is your trigger an XMark Pro (with the set screw in the trigger shoe)? If not, please don't mess with it.
_________________________
NRA Lifetime Member

Top
#3145395 - 01/30/13 10:18 AM Re: Accurizing a stock 700? [Re: infoman jr.]
GOODWIN
4 Point


Registered: 02/18/08
Posts: 453
Loc: Chattanooga, TN

Offline
 Originally Posted By: infoman jr.
 Originally Posted By: GOODWIN
And can I adjust the factory trigger myself with minimal gunsmithing knowledge?

Is your trigger an XMark Pro (with the set screw in the trigger shoe)? If not, please don't mess with it.


How do I tell? I don't see a set screw? This gun was purchased in 2003 I believe

Top
#3145409 - 01/30/13 10:30 AM Re: Accurizing a stock 700? [Re: GOODWIN]
Rubberduck270
10 Point


Registered: 11/01/10
Posts: 3007
Loc: Lawrence Co.

Offline
It's the older style trigger then. You can find pretty good instructions online on how to adjust them. It's a 3 screw system and can be a little intimidating if you've never adjusted a trigger before. Most gunsmiths will do a 700 trigger job for pretty cheap.

I've adjusted several and once you get the hang of it there's nothing to it. They never will break like a Timney though. A Timney trigger is $120 well spent in my book.
_________________________
Smokeless Muzzleloading: It ain't your Grampa's flintlock

Top
#3145515 - 01/30/13 11:55 AM Re: Accurizing a stock 700? [Re: Rubberduck270]
GOODWIN
4 Point


Registered: 02/18/08
Posts: 453
Loc: Chattanooga, TN

Offline
Ok I found a great youtube video and was able to adjust it. It is the older model with 3 screws. It's lighter now with a little creep but not too bad. Still playing around with it. It may not be a Timney but I think it's better than stock. After some sore forearms I've managed to free float the barrel as well. I used the deep-well socket and sandpaper technique. I went up on the size of socket a couple of times and finally got it where I want it. Bout to head out to go look at scopes now. Want to stay under $500 and something with at least a 16X. I've got leupold bases and rings right now. Do you think I'd be better off with a one-piece picatinney rail? Just getting my feet wet into long range shooting so thanks for the info. Got to start somewhere I guess.
Top
#3145532 - 01/30/13 12:08 PM Re: Accurizing a stock 700? [Re: GOODWIN]
Rubberduck270
10 Point


Registered: 11/01/10
Posts: 3007
Loc: Lawrence Co.

Offline
I've got a couple triggers that I've done that I've never been able to get all the creep out of. Just part of it.

What size objective are you looking at for your scope? I'm a big fan of the 1 piece DNZ Game Reaper mounts. They run roughly $50.
_________________________
Smokeless Muzzleloading: It ain't your Grampa's flintlock

Top
#3145576 - 01/30/13 12:36 PM Re: Accurizing a stock 700? [Re: Rubberduck270]
rdl65
10 Point


Registered: 03/08/08
Posts: 2520
Loc: Washington County

Offline
I would go with a 20moa one-piece picatinny rail and a quality set of rings.
_________________________
Some people are alive simply because it is illegal to kill them.

Top
#3145950 - 01/30/13 04:46 PM Re: Accurizing a stock 700? [Re: Rubberduck270]
GOODWIN
4 Point


Registered: 02/18/08
Posts: 453
Loc: Chattanooga, TN

Offline
 Originally Posted By: Rubberduck270
I've got a couple triggers that I've done that I've never been able to get all the creep out of. Just part of it.

What size objective are you looking at for your scope? I'm a big fan of the 1 piece DNZ Game Reaper mounts. They run roughly $50.


I'm looking at a 40mm - 50mm obj. Will I be able to tell much difference in the 40 vs the 50?

Top
Page 1 of 3 123>


Moderator:  RUGER, Bobby G, Unicam, CBU93, stretch, TurkeyBurd, Kimber45, Mrs.Unicam, Crappie Luck, gtk 
Hop to:
Top Posters
4106599
RUGER
88400
Deer Assassin
65979
BSK
62020
Crappie Luck
51392
spitndrum
Newest Members
yarddawg54, schiesser, bigdoc, Bggamehunter, willy2763
13605 Registered Users
Who's Online
1 registered (quickfire) and 62 anonymous users online.
Forum Stats
13605 Members
43 Forums
100233 Topics
1180120 Posts

Max Online: 788 @ 11/11/13 08:06 PM
Moon Phase
CURRENT MOON
December
Su M Tu W Th F Sa
1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31
Forum Donations
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!

TN Burn Safe

Generated in 0.005 seconds in which 0 seconds were spent on a total of 15 queries. Zlib compression enabled.