Tndeer Logo

Page 2 of 2 <12
Topic Options
#3086635 - 12/19/12 09:43 AM Re: convert regular outboard to jet? [Re: catman529]
scn
16 Point


Registered: 02/05/03
Posts: 10449
Loc: Brentwood, TN US

Offline
Fishing line getting caught behind the prop is bad for cutting the seal to the lower unit and letting water get in there.

Before it gets too cold (if your motor is stored outside), you probably need to check the conditon of the lower unit lube. If it is "milky", you have a seal issue and need to replace the seal and put in new lube. If water gets into your lower unit and freezes, it can crack your lower unit and then you will have to replace the whole deal.
_________________________
Life is too short to fish with a dead cricket.

Top
#3086733 - 12/19/12 10:56 AM Re: convert regular outboard to jet? [Re: scn]
catman529
spiderboy
16 Point


Registered: 11/10/10
Posts: 17592
Loc: Franklin TN

Offline
 Originally Posted By: scn
Fishing line getting caught behind the prop is bad for cutting the seal to the lower unit and letting water get in there.

Before it gets too cold (if your motor is stored outside), you probably need to check the conditon of the lower unit lube. If it is "milky", you have a seal issue and need to replace the seal and put in new lube. If water gets into your lower unit and freezes, it can crack your lower unit and then you will have to replace the whole deal.
thanks for the advice. I had known of that but haven't checked the lube yet. Going to put fresh oil in the lower unit anyway. Motor is in the garage so it should be safe.
_________________________
>>>------------------>

Top
#3086760 - 12/19/12 11:23 AM Re: convert regular outboard to jet? [Re: catman529]
R Crabtree
4 Point


Registered: 12/05/05
Posts: 426
Loc: East TN

Offline
I had a guy make a prop guard for a little 5hp jon boat motor. He used a pitch fork head. Pretty simple design and definitely keeps the prop off the bottom. If you are interested in going that route I could prolly get a picture up.
_________________________
we don't rent pigs!
uva uvam vivendo varia fit

Top
#3086768 - 12/19/12 11:28 AM Re: convert regular outboard to jet? [Re: R Crabtree]
R Crabtree
4 Point


Registered: 12/05/05
Posts: 426
Loc: East TN

Offline
A feller can find anything with google!

This is not mine but you get the idea....







_________________________
we don't rent pigs!
uva uvam vivendo varia fit

Top
#3086959 - 12/19/12 01:43 PM Re: convert regular outboard to jet? [Re: catman529]
Urban_Hunter
8 Point


Registered: 10/15/12
Posts: 1717
Loc: TN

Offline
Not trying to argue, but I've only seen one bushing that I could see was damaged by looking at it. If you painted it, you have to paint a part of the output shaft and a part of the prop, as the bushing may be spun on the prop side or the shaft side. If it is slipping, it can only be the bushing... unless you are going fast enough to get air under the boat. If your engine has good compression, you can SOMETIMES tell by turning the prop by hand (ignition off) while in gear. Try it both directions. The engine should turn with the prop (watch the flywheel). This really only works on 4cyl and bigger engines.

Note... 4 cylinder.... not 4 stroke
_________________________
I used to be indecisive. Now I'm not sure.

You're never to old to learn something stupid.

Top
#3087002 - 12/19/12 02:00 PM Re: convert regular outboard to jet? [Re: Urban_Hunter]
catman529
spiderboy
16 Point


Registered: 11/10/10
Posts: 17592
Loc: Franklin TN

Offline
I forgot about the pitchfork! A TWRA guy at Williamsport told me about that trick.

Urban hunter - my motor is only a 5 horse and I can easily turn the engine by hand with the prop in gear. Ill check the paint mark that I made.
_________________________
>>>------------------>

Top
#3088081 - 12/20/12 07:31 AM Re: convert regular outboard to jet? [Re: catman529]
Urban_Hunter
8 Point


Registered: 10/15/12
Posts: 1717
Loc: TN

Offline
5 horse briggs? Great little motors.
_________________________
I used to be indecisive. Now I'm not sure.

You're never to old to learn something stupid.

Top
#3088344 - 12/20/12 10:05 AM Re: convert regular outboard to jet? [Re: Urban_Hunter]
catman529
spiderboy
16 Point


Registered: 11/10/10
Posts: 17592
Loc: Franklin TN

Offline
yep it's a 5 horse briggs
_________________________
>>>------------------>

Top
#3088624 - 12/20/12 01:48 PM Re: convert regular outboard to jet? [Re: catman529]
CATCHDAWG
10 Point


Registered: 04/02/04
Posts: 3956
Loc: Bradley co. TN

Offline
 Originally Posted By: catman529
yep it's a 5 horse briggs

Why did they quit making that motor? I've never heard anything bad about them. I was in a boat last summer with a 9.9 Johnson and his buddy had the little Briggs on his and our boat couldn't keep up!
Coleman is making one now that might be the same thing with a different name but I'm not sure.
_________________________
woods n water

Top
Page 2 of 2 <12


Moderator:  RUGER, Unicam, CBU93, stretch, Bobby G, Cuttin Caller, Kimber45, Mrs.Unicam, Crappie Luck, gtk 
Hop to:
Top Posters
4106599
RUGER
88400
Deer Assassin
65979
BSK
62020
Crappie Luck
51392
spitndrum
Newest Members
yarddawg54, schiesser, bigdoc, Bggamehunter, willy2763
13605 Registered Users
Who's Online
0 registered and 49 anonymous users online.
Forum Stats
13605 Members
43 Forums
100233 Topics
1180120 Posts

Max Online: 788 @ 11/11/13 08:06 PM
Moon Phase
CURRENT MOON
December
Su M Tu W Th F Sa
1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31
Forum Donations
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!

TN Burn Safe

Generated in 0.005 seconds in which 0.001 seconds were spent on a total of 15 queries. Zlib compression enabled.