#3057682 - 11/30/12 09:52 PM
Remington 1100 ??
|
southernhunter
8 Point
Registered: 09/08/10
Posts: 1228
Loc: alabama
|
Offline
|
|
Does any one know if they make a 21 inch rem choke barrel for a remington 1100 mag that shoots 3 inch shells ? I can find them in 2 3/4 but not 3 "
|
|
Top
|
|
|
|
|
#3057736 - 11/30/12 10:46 PM
Re: Remington 1100 ??
[Re: southernhunter]
|
southernhunter
8 Point
Registered: 09/08/10
Posts: 1228
Loc: alabama
|
|
Offline
|
|
Just learned u can have screw in chokes installed older barrels , anyone ever done this ? I have a remington barrel some one sawed off , would make a good donor for this ??
|
|
Top
|
|
|
|
|
#3058737 - 12/01/12 07:34 PM
Re: Remington 1100 ??
[Re: southernhunter]
|
Buccaneer
4 Point
Registered: 08/29/06
Posts: 331
Loc: Hendersonville
|
|
Offline
|
|
The only thing you are going to get in a vent riv Rem Choke is 30", 28" or 26". The 21" barrels with Rem Choke are either rifle sights or cantilever scope mounts for rifled slug chokes. For your cut down barrel maybe look here? http://www.americhoke.com/#screw
|
|
Top
|
|
|
|
|
#3058794 - 12/01/12 07:57 PM
Re: Remington 1100 ??
[Re: Buccaneer]
|
Benelli 4 Life
4 Point
Registered: 05/15/12
Posts: 233
Loc: Bledsoe Co. TN
|
|
Offline
|
|
Remington made a 3in 21" VR Rem choke barrel for a 870 at one time but don't know bout a 1100.
_________________________
You can't fix stupid!
|
|
Top
|
|
|
|
|
#3059286 - 12/02/12 09:22 AM
Re: Remington 1100 ??
[Re: southernhunter]
|
rukiddin?
8 Point
Registered: 02/04/09
Posts: 1212
Loc: E. Tenn
|
|
Offline
|
|
Just learned u can have screw in chokes installed older barrels , anyone ever done this ? I have a remington barrel some one sawed off , would make a good donor for this ??
It can be done, but they will not be rem chokes. Rem has notoriously thick threads on their chokes and requires all the barrel to do it right. Briley could probably do it, or colonial chokes would probably work. If anyone tells you that they could put rem chokes back in it, I would seriously question that and their competency as a gunsmith.
Unless you are specifically looking for a 21" barrel with chokes, you will probably come out cheaper to buy a 26" barrel than to have briley do the 21" barrel. JMO.
Edited by rukiddin? (12/02/12 09:24 AM)
_________________________
Just because you do not agree with my opinion, it does'nt make me wrong!
"I'm gone to carolina in my mind"
|
|
Top
|
|
|
|
|
#3060409 - 12/02/12 09:27 PM
Re: Remington 1100 ??
[Re: rukiddin?]
|
pressfit
8 Point
Registered: 12/28/09
Posts: 1823
Loc: Giles Co. Tn
|
|
Offline
|
|
You may have some ejection problems.. I cut a 20 gauge down once to 21 inches and the gun would not eject the shell.. I think the short barrel did not let enough gas stay in the barrel long enough to work the action.. I added about 4 inches to the barrel and it worked fine.. that is probably why they dont sell them.
_________________________
10 years ago we had
Steve Jobs,
Bob Hope
and Johnny Cash
- Now we have no Jobs, no Hope and no Cash!
|
|
Top
|
|
|
|
|
#3062251 - 12/03/12 10:03 PM
Re: Remington 1100 ??
[Re: pressfit]
|
southernhunter
8 Point
Registered: 09/08/10
Posts: 1228
Loc: alabama
|
|
Offline
|
|
They sell them for the 2 3/4 guns just not the 3 inch .
|
|
Top
|
|
|
|
Moderator: RUGER, gtk, Bobby G, Unicam, CBU93, stretch, TurkeyBurd
|
12107 Members
38 Forums
115784 Topics
1410348 Posts
Max Online: 756 @ 11/20/12 09:10 AM
|
|
|
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!
|
|
|
