#301072 - 07/15/07 11:24 PM
270 wsm browning abolt ??
|
8pointbetter
8 Point
Registered: 12/31/06
Posts: 1362
Loc: columbia
|
Offline
|
|
i finally got my gun together put a leupold 3x9x40 vxII on top of it. went to farm to shoot bought some winchester ballistic silvertip 130 grain shells to shoot started at 20 yards got it hitting in the black after about 7 shots then went to 100yards and it is dead in the middle but about 4 inches high. then went to 200 yards and got about 3 shots in a 3inch circle what should i do? should i split difference at 100yards so it want be so bad out or should i just remember its high at 100 yards. the only thing is i don't really take 200yards shots but take a lot under a 100. what do you all suggest. thanks for the input
_________________________
REBEL BY NATURE AND SOUTHERN BY THE GRACE OF GOD HUNT TO LIVE LIVE TO HUNT ΜΟΛΩΝ ΛΑΒΕ BONE COLLECTOR aka RAMBO
|
|
Top
|
|
|
|
#301080 - 07/16/07 12:21 AM
Re: 270 wsm browning abolt ??
[Re: 8pointbetter]
|
Model70Man
12 Point
Registered: 09/30/05
Posts: 6102
Loc: Knoxville, TN
|
Offline
|
|
The 270 WSM is a flat shooting cartridge. I would site it in at 1.5" high at 100 yds and you'll be fine.
_________________________
Winchester Model 70 Stainless Left Hand .270 Win. McMillan Edge Talley Lightweights Zeiss Victory Varipoint #60 Illuminated
|
|
Top
|
|
|
|
#301089 - 07/16/07 01:25 AM
Re: 270 wsm browning abolt ??
[Re: Model70Man]
|
Tiny
16 Point
Registered: 02/09/02
Posts: 17602
Loc: Knoxville
|
Offline
|
|
I like mine in most cases 1" to no more than 2" high at 100. where I may be shooting 200 +. Dead on to 1" high at 100 if most likely shooting under 200.
Either way I do shoot em at 50 and 200 to check things out.
_________________________
Have a Great Day and God Bless
God Answers Prayers Yes No or Not Yet
|
|
Top
|
|
|
|
#301172 - 07/16/07 07:26 AM
Re: 270 wsm browning abolt ??
[Re: Tiny]
|
Whelen Man
TnDeer Old Timer
8 Point
Registered: 03/12/99
Posts: 2327
Loc: Athens, TN, USA
|
Offline
|
|
I would've expected a 270 WSM to have been higher than that at 200 if it's 4 inches high at 100. I usually do things backwards from most people. I get the gun on paper, sight it in at 200, and then shoot a few shots at 100 to see where it's shooting. That 270 WSM should be fine for a 200 yard zero unless you know you'll never have need for a long shot and then it'll be fine zeroed at 100. It all depends on what you know you'll be using it for. If it's zeroed at 200 I wouldn't expect it to be over 1.5-2.0 inches high at 100.
_________________________
Recipient of the Coveted Senior Discount!
|
|
Top
|
|
|
|
#312283 - 07/25/07 12:34 AM
Re: 270 wsm browning abolt ??
[Re: skynimrod]
|
Tikkabuck
10 Point
Registered: 07/05/05
Posts: 4019
Loc: Humphreys,Co
|
Offline
|
|
My .270 wsm is sighted in 2" high at 100 yards and I shoot 130gr SST's over Magpro powered handloads,I don't know what that equals out to when you start shooting a long ways but last season I shot 2 deer one at 380 yards one at 373. I held dead on and they dropped,also shot some under 100 all with dead on holds,all down at the shot. I'm shooting a Winchester with a 24" tube.
Hope this helps.
Edited by Tikkabuck (07/25/07 12:38 AM)
_________________________
A government big enough to give you everything you want,is big enough to take away everything you have.Thomas Jefferson
God Bless Our Folks Over Seas and Vet's Everywhere
My Heros my 3 Sons
|
|
Top
|
|
|
|
#312314 - 07/25/07 02:55 AM
Re: 270 wsm browning abolt ??
[Re: Tikkabuck]
|
8pointbetter
8 Point
Registered: 12/31/06
Posts: 1362
Loc: columbia
|
Offline
|
|
thanks guys
_________________________
REBEL BY NATURE AND SOUTHERN BY THE GRACE OF GOD HUNT TO LIVE LIVE TO HUNT ΜΟΛΩΝ ΛΑΒΕ BONE COLLECTOR aka RAMBO
|
|
Top
|
|
|
|
#316876 - 07/28/07 09:19 AM
Re: 270 wsm browning abolt ??
[Re: 8pointbetter]
|
bonekelektr
6 Point
Registered: 07/24/07
Posts: 735
Loc: Sullivan Gardens
|
Offline
|
|
My nephew has a Mt. Ti that would'nt shoot BSTs..He ended up loading Nosler accb.s..The most accurate load listed in the manual works the best for him after trying 4 different loads....He ended up gettin' .50" at 100' inside 1 at 2..The short mag barrels heat up real quick and he had some build up problems with the BSTs..I shoot em in my 300WSM but I run a boresnake thru after each shot and let the barrel cool..
_________________________
I thank the Lord Jesus Christ for my salvation.....
|
|
Top
|
|
|
|
#316881 - 07/28/07 09:25 AM
Re: 270 wsm browning abolt ??
[Re: bonekelektr]
|
bonekelektr
6 Point
Registered: 07/24/07
Posts: 735
Loc: Sullivan Gardens
|
Offline
|
|
At 4" hi at 100 you should be able to hold dead on to almost 500 with a 130 gr. bullet..Like most I usually go 1.5 to 2 hi at 100....
_________________________
I thank the Lord Jesus Christ for my salvation.....
|
|
Top
|
|
|
|
Moderator: RUGER, gtk, Bobby G, Unicam, CBU93, stretch, TurkeyBurd
|
12113 Members
38 Forums
115977 Topics
1412500 Posts
Max Online: 756 @ 11/20/12 09:10 AM
|
|
|
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!
|
|
|