Tndeer Logo

Page 3 of 3 <123
Topic Options
#2973958 - 10/09/12 07:52 AM Re: "Waterproofing" Your Muzzleloader [Re: KPH]
Brisco Darlin
10 Point


Registered: 04/24/12
Posts: 3263
Loc: East Tn.

Offline
 Originally Posted By: hellacatcher
I don't use anything and never had any trouble. I find it hard to belive that mosture can get around the bullet or past the primer.
on a flintlock or caplock it can.
_________________________
I'm a little mean but i make up for it by being real healthy.

Top
#2973970 - 10/09/12 08:01 AM Re: "Waterproofing" Your Muzzleloader [Re: Brisco Darlin]
KPH
10 Point


Registered: 08/06/05
Posts: 3863
Loc: Hendersonville Tenn

Offline
 Originally Posted By: Brisco Darlin
 Originally Posted By: hellacatcher
I don't use anything and never had any trouble. I find it hard to belive that mosture can get around the bullet or past the primer.
on a flintlock or caplock it can.

A fleintlock or acaplock is a different story.
_________________________
I can spell I just can't type.

Top
#2974363 - 10/09/12 12:30 PM Re: "Waterproofing" Your Muzzleloader [Re: KPH]
Tennessee Todd Moderator
Communicates like Rad
16 Point


Registered: 03/12/99
Posts: 12694
Loc: TuTu City, Tn

Offline
Get you a Knight and use the red plastic jacket system and you could hunt in a swimming pool and it will still go off. Trust me, I've put it to the test.
_________________________
This Country might survive Obama but what we won't survive is the mindset that elected him.

Top
#2974373 - 10/09/12 12:33 PM Re: "Waterproofing" Your Muzzleloader [Re: Tennessee Todd]
FrontierGander
6 Point


Registered: 05/09/10
Posts: 657
Loc: Boncarbo,Colorado

Offline
the jacket only seals the primer.

Put a projectile in your bore and with the breech plug removed, look down the barrel " breech plug end" and you'll find out even a saboted load does not seal the bore and allows moisture to get directly to the powder.

Top
#2983403 - 10/15/12 09:36 PM Re: "Waterproofing" Your Muzzleloader [Re: Wes Parrish]
HMHunters75
Spike


Registered: 01/01/11
Posts: 85
Loc: TN

Offline
Condom or finger from rubber glove.
Top
#2986145 - 10/17/12 02:35 PM Re: "Waterproofing" Your Muzzleloader [Re: HMHunters75]
Big J
16 Point


Registered: 03/10/06
Posts: 11992
Loc: Joelton

Offline
I shoot a disc extreme! No worries in the rain!
_________________________
Love God, Love people, Live Gospel!!

Top
#2986609 - 10/17/12 07:29 PM Re: "Waterproofing" Your Muzzleloader [Re: Big J]
fishboy1
16 Point


Registered: 01/13/03
Posts: 10552
Loc: Warren Co

Offline
I have used electrical tape, duct tape, balloon, packing tape, mailing label(not recommended)

Doesn't change POI. The gasses in front of the bullet blow through the tape before the bullet ever hits it.

Now I wouldnt wrap 10 layers of tape over the barrel or anything stupid like that. Just the one layer across the opening and one piece around the barrel to hold the ends tight.
_________________________
If you can't trust people with freedom, how can you trust them with power ?




Top
#2987181 - 10/18/12 08:26 AM Re: "Waterproofing" Your Muzzleloader [Re: Wes Parrish]
tellico4x4
6 Point


Registered: 11/29/04
Posts: 939
Loc: Killen, AL

Offline
 Originally Posted By: Wes Parrish
 Originally Posted By: WestTn Huntin'man
. . . . . thin enough to not mess up a shot and very cheap.

I agree, at closer ranges.
I've done this, used finger cots, condoms, you name it.
Have also found most above mentioned to be somewhat "fragile" and often tear or develop a break.

Electrical tape is a little thicker and tougher, and what I had been told was to place a piece over the bore, then wrap another piece around the barrel (covering both ends of the piece over the bore). This would be more durable, but to what extent does it effect accuracy?


Two pieces of electrical tape criss-crossed is what I have used for 30+ yrs. Started using it way back when with a "Hawkens" on CO ML hunts and still use it on my Pro-Hunter. Kept a load in Iowa last year for a week with rain, sleet & snow and shot fine when the time came. Have tested at range with no detrimental impacts observed.
_________________________
BulletHuntingClub.com

Top
#2988415 - 10/19/12 12:15 AM Re: "Waterproofing" Your Muzzleloader [Re: HMHunters75]
scn
16 Point


Registered: 02/05/03
Posts: 10136
Loc: Brentwood, TN US

content Online
Wes,

I use the electrical tape and can't tell any difference. I've been told that even with a tight sabot/bullet seal that there is enough gas ahead of the sabot and bullet that it ruptures the tape well before the bullet gets to it.

The electrical tape is SOP for me.
_________________________
Life is too short to fish with a dead cricket.

Top
#2988488 - 10/19/12 05:45 AM Re: "Waterproofing" Your Muzzleloader [Re: scn]
Wes Parrish
16 Point


Registered: 06/12/02
Posts: 19410
Loc: Knoxville-Dover-Union City, TN

Offline
Thanks for all the replies.
Over the years I've tried most, with exception to the electrical tape, and/or shooting thru anything beyond 50 yards. What's helped most for me is simply going to an inline muzzleloader using shotgun primers, as this system is significantly better in rainy weather than the side-locks.

I've done a lot of muzzleloading hunting in "inclement" weather and have yet to find anything that's 100% going to work. I remember one day sitting on stand in a pouring rain, and knowing it was going to be pouring, had very carefully used duct tape to totally seal the bore (criss crossed some strips over the bore, then wrapped some around the barrel). But with my barrel pointed downward, moisture was still able to "run" under the tape, and when the gun was raise, it ran down the inside of the barrel.

I've also used condoms in the rain, then noticed water had "slipped" under them. With some guns, it's hard to get a good seal because of the ramrod and front sight, not to mention fragility. Anytime you're caught in the rain, it would typically seem to make the most sense to keep your muzzle pointed downward, but just keep in mind should water run beneath your tape, it can run right into your chamber when you raise your gun.

Using the electrical tape seems to be the best thing going.

Thanks again.

Top
Page 3 of 3 <123


Moderator:  RUGER, Tennessee Todd, Bobby G, Unicam, CBU93, stretch, Kimber45, Mrs.Unicam, Crappie Luck 
Hop to:
Top Posters
4105874
RUGER
87596
Deer Assassin
65673
BSK
61390
Crappie Luck
51376
spitndrum
Newest Members
TnDear, buckslayer85, crose84, Fisher 1959, AKeys
13384 Registered Users
Who's Online
106 registered (saddleman1, Model 1, 444 Fan, iowavf, kasey, junebugwapiti, 9 invisible) and 161 anonymous users online.
Forum Stats
13384 Members
42 Forums
95887 Topics
1122827 Posts

Max Online: 788 @ 11/11/13 08:06 PM
Moon Phase
CURRENT MOON
October
Su M Tu W Th F Sa
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30 31
Forum Donations
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!

TN Burn Safe

Generated in 0.05 seconds in which 0.001 seconds were spent on a total of 14 queries. Zlib compression enabled.