Tndeer Logo

Page 2 of 2 <12
Topic Options
#2967463 - 10/03/12 06:43 PM Re: 180gr. hornady interlok [Re: Rockhound]
fairchaser
8 Point


Registered: 09/13/11
Posts: 1343
Loc: TN, USA

Offline
 Originally Posted By: Rockhound
 Originally Posted By: fairchaser
 Originally Posted By: big jim
Hornady interlocks are a very good standard bullet. 180 Gr is a bit heavy for our deer.

Fairchaser: Try the 140 gr they shoot as flat as the 130 and hit harder.


I have tried the 140's Big Jim, but they still don't have the knock down like the 150's. I do give up a little on the down range ballistics however. But, most of my TN hunting is close range anyway. I do have my gun doped out to 600 yards just in case. \:\)


I haven't messed with reloading in my 270 yet, would you care to let me in on a pet load on your 270 and the 150 gr. Interlok


I use 53 gr of IMR 4831 Winchester brass and CCI primers. That produces 2791 fps from my browning abolt ss. The boss is set on 5.5. That set up should shoot sub moa groups pretty easily. Best of luck.
_________________________
"I always wanted to do something that was unequivocal" Charles Morris played by Anthony Hopkins in the movie the Edge.

Top
#2967685 - 10/03/12 09:06 PM Re: 180gr. hornady interlok [Re: fairchaser]
Rockhound
10 Point


Registered: 04/04/11
Posts: 3076
Loc: Lawrence Co. TN

Offline
 Originally Posted By: fairchaser
 Originally Posted By: Rockhound
 Originally Posted By: fairchaser
 Originally Posted By: big jim
Hornady interlocks are a very good standard bullet. 180 Gr is a bit heavy for our deer.

Fairchaser: Try the 140 gr they shoot as flat as the 130 and hit harder.


I have tried the 140's Big Jim, but they still don't have the knock down like the 150's. I do give up a little on the down range ballistics however. But, most of my TN hunting is close range anyway. I do have my gun doped out to 600 yards just in case. \:\)


I haven't messed with reloading in my 270 yet, would you care to let me in on a pet load on your 270 and the 150 gr. Interlok


I use 53 gr of IMR 4831 Winchester brass and CCI primers. That produces 2791 fps from my browning abolt ss. The boss is set on 5.5. That set up should shoot sub moa groups pretty easily. Best of luck.


Thats great! Im trying to make 4831 my go to powder for my 270, 300 wsm, and 22-250 with heavy bullets
_________________________
Isaiah 40:31.... Those who wait upon The Lord .....shall renew there strength ......

Top
Page 2 of 2 <12


Moderator:  RUGER, gtk, Bobby G, Unicam, CBU93, stretch, TurkeyBurd, Kimber45, Mrs.Unicam, Crappie Luck 
Hop to:
Top Posters
4106436
RUGER
88232
Deer Assassin
65979
BSK
61895
Crappie Luck
51392
spitndrum
Newest Members
cw308, TNDeerHunter270, rmyers@atpro1, ojf, Muwasi
13551 Registered Users
Who's Online
119 registered (Bamamonts, Rubberduck270, Vermin93, Bucket, THEdonkey0515, MUP, 6 invisible) and 191 anonymous users online.
Forum Stats
13551 Members
42 Forums
99374 Topics
1168997 Posts

Max Online: 788 @ 11/11/13 08:06 PM
Moon Phase
CURRENT MOON
November
Su M Tu W Th F Sa
1
2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
30
Forum Donations
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!

TN Burn Safe

Generated in 0.054 seconds in which 0.001 seconds were spent on a total of 15 queries. Zlib compression enabled.