Tndeer Logo

Page 1 of 2 12>
Topic Options
#2955396 - 09/24/12 01:03 PM first savage problems...
Rockhound
10 Point


Registered: 04/04/11
Posts: 2973
Loc: Lawrence Co. TN

Offline
Went to tear it down today to lube the breech plug/vent liner threads, and low and behold i cant get the breech plug out!! Ive got it standing on end soaking in wd40. Any experience with this? Also if and when i do get it out how do i clean the plug and liner to insure the oil is gone? Will rubbing alcohol work?
_________________________
Isaiah 40:31.... Those who wait upon The Lord .....shall renew there strength ......

Top
#2955615 - 09/24/12 03:25 PM Re: first savage problems... [Re: Rockhound]
tasaman
8 Point


Registered: 01/11/10
Posts: 1109
Loc: Woodlawn, TN

Offline
I highly doubt the WD40 will work. Try using the supplied wrench and the whacking it with a hammer on the end. Should break the bond and remove. If not you can try Pine-sol. Soak the same way you were with WD40. As for removing residue just wash out with dish detergent like Dawn and water.
Top
#2955643 - 09/24/12 03:44 PM Re: first savage problems... [Re: tasaman]
pressfit
10 Point


Registered: 12/28/09
Posts: 3234
Loc: Giles Co. Tn

Offline
My suggestion would be to use kroil..
_________________________
Do you know Jesus as your Savior?don't wait until its too late.You are only one heartbeat away from eternity. You never know when it will be your last. Repent and trust the Lord today as your Savior!

Top
#2955823 - 09/24/12 06:17 PM Re: first savage problems... [Re: pressfit]
East TN Hunter
4 Point


Registered: 08/24/07
Posts: 185
Loc: East TN

Offline
I did not have the same issue removing. Once you get it out, a little anti-sieze should prevent future problems.

I use Clean Break CLP to clean vent liner and breech plug.

Top
#2955908 - 09/24/12 07:37 PM Re: first savage problems... [Re: East TN Hunter]
BluegrassDan
6 Point


Registered: 09/14/09
Posts: 513
Loc: Elizabethton, Carter County, T...

Offline
I use teflon tape on my Savage's breech plug. Works very well.

Best of luck freeing that bound plug.

Top
#2956051 - 09/24/12 08:58 PM Re: first savage problems... [Re: pressfit]
Rockhound
10 Point


Registered: 04/04/11
Posts: 2973
Loc: Lawrence Co. TN

Offline
 Originally Posted By: pressfit
My suggestion would be to use kroil..
the best stuff made imo just didn't have any on hand
_________________________
Isaiah 40:31.... Those who wait upon The Lord .....shall renew there strength ......

Top
#2956054 - 09/24/12 08:59 PM Re: first savage problems... [Re: tasaman]
Rockhound
10 Point


Registered: 04/04/11
Posts: 2973
Loc: Lawrence Co. TN

Offline
 Originally Posted By: tasaman
I highly doubt the WD40 will work. Try using the supplied wrench and the whacking it with a hammer on the end. Should break the bond and remove. If not you can try Pine-sol. Soak the same way you were with WD40. As for removing residue just wash out with dish detergent like Dawn and water.


I didn't get a wrench i got a socket
_________________________
Isaiah 40:31.... Those who wait upon The Lord .....shall renew there strength ......

Top
#2956115 - 09/24/12 09:41 PM Re: first savage problems... [Re: pressfit]
Deer Assassin
Non-Typical


Registered: 08/01/03
Posts: 87567
Loc: Kingston Springs

Offline
 Originally Posted By: pressfit
My suggestion would be to use kroil..
ditto
_________________________
Drag Racing

Spending money I dont have

on things I dont need

to impress people I dont know

Top
#2956720 - 09/25/12 10:44 AM Re: first savage problems... [Re: Deer Assassin]
EastTNHunter
10 Point


Registered: 03/08/10
Posts: 2996
Loc: Rhea Co., TN

Offline
 Originally Posted By: Deer Assassin
 Originally Posted By: pressfit
My suggestion would be to use kroil..
ditto


x3

And if the breechplug is stuck, then your ventliner prolly will be, too. The supplied allen wrench is very cheap, so you may want to try a different one when trying to break the ventliner free. Do what the owner's manual says when you get it all straightened out: shoot 2-3 shots when clean, then break it free and retighten to break the carbon bond that causes it to seize.

Top
#2956807 - 09/25/12 11:58 AM Re: first savage problems... [Re: EastTNHunter]
Southern Sportsman
8 Point


Registered: 09/18/11
Posts: 1023
Loc: West TN

Offline
 Originally Posted By: EastTNHunter
 Originally Posted By: Deer Assassin
 Originally Posted By: pressfit
My suggestion would be to use kroil..
ditto


x3



x4

Top
Page 1 of 2 12>


Moderator:  RUGER, Tennessee Todd, Bobby G, Unicam, CBU93, stretch, Kimber45, Mrs.Unicam, Crappie Luck 
Hop to:
Top Posters
4105861
RUGER
87567
Deer Assassin
65620
BSK
61366
Crappie Luck
51376
spitndrum
Newest Members
buckslayer85, crose84, Fisher 1959, AKeys, GUIDO
13383 Registered Users
Who's Online
15 registered (cdw338, Paul Burns, ruthunter, LA man, Prowler, Buckhunter10, 3 invisible) and 64 anonymous users online.
Forum Stats
13383 Members
42 Forums
95693 Topics
1120195 Posts

Max Online: 788 @ 11/11/13 08:06 PM
Moon Phase
CURRENT MOON
October
Su M Tu W Th F Sa
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30 31
Forum Donations
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!

TN Burn Safe

Generated in 0.052 seconds in which 0.001 seconds were spent on a total of 15 queries. Zlib compression enabled.