Tndeer Logo

Page all of 2 12>
Topic Options
#2955396 - 09/24/12 01:03 PM first savage problems...
Rockhound
10 Point


Registered: 04/04/11
Posts: 2668
Loc: Lawrence Co. TN

Offline
Went to tear it down today to lube the breech plug/vent liner threads, and low and behold i cant get the breech plug out!! Ive got it standing on end soaking in wd40. Any experience with this? Also if and when i do get it out how do i clean the plug and liner to insure the oil is gone? Will rubbing alcohol work?
_________________________
Isaiah 40:31.... Those who wait upon The Lord .....shall renew there strength ......

Top
#2955615 - 09/24/12 03:25 PM Re: first savage problems... [Re: Rockhound]
tasaman
8 Point


Registered: 01/11/10
Posts: 1011
Loc: Woodlawn, TN

Offline
I highly doubt the WD40 will work. Try using the supplied wrench and the whacking it with a hammer on the end. Should break the bond and remove. If not you can try Pine-sol. Soak the same way you were with WD40. As for removing residue just wash out with dish detergent like Dawn and water.
Top
#2955643 - 09/24/12 03:44 PM Re: first savage problems... [Re: tasaman]
pressfit
10 Point


Registered: 12/28/09
Posts: 2802
Loc: Giles Co. Tn

Offline
My suggestion would be to use kroil..
_________________________
Do you know Jesus as your Savior?don't wait until its too late.You are only one heartbeat away from eternity. You never know when it will be your last. Repent and trust the Lord today as your Savior!

Top
#2955823 - 09/24/12 06:17 PM Re: first savage problems... [Re: pressfit]
East TN Hunter
4 Point


Registered: 08/24/07
Posts: 185
Loc: East TN

Offline
I did not have the same issue removing. Once you get it out, a little anti-sieze should prevent future problems.

I use Clean Break CLP to clean vent liner and breech plug.

Top
#2955908 - 09/24/12 07:37 PM Re: first savage problems... [Re: East TN Hunter]
BluegrassDan
4 Point


Registered: 09/14/09
Posts: 489
Loc: Elizabethton, Carter County, T...

Offline
I use teflon tape on my Savage's breech plug. Works very well.

Best of luck freeing that bound plug.

Top
#2956051 - 09/24/12 08:58 PM Re: first savage problems... [Re: pressfit]
Rockhound
10 Point


Registered: 04/04/11
Posts: 2668
Loc: Lawrence Co. TN

Offline
 Originally Posted By: pressfit
My suggestion would be to use kroil..
the best stuff made imo just didn't have any on hand
_________________________
Isaiah 40:31.... Those who wait upon The Lord .....shall renew there strength ......

Top
#2956054 - 09/24/12 08:59 PM Re: first savage problems... [Re: tasaman]
Rockhound
10 Point


Registered: 04/04/11
Posts: 2668
Loc: Lawrence Co. TN

Offline
 Originally Posted By: tasaman
I highly doubt the WD40 will work. Try using the supplied wrench and the whacking it with a hammer on the end. Should break the bond and remove. If not you can try Pine-sol. Soak the same way you were with WD40. As for removing residue just wash out with dish detergent like Dawn and water.


I didn't get a wrench i got a socket
_________________________
Isaiah 40:31.... Those who wait upon The Lord .....shall renew there strength ......

Top
#2956115 - 09/24/12 09:41 PM Re: first savage problems... [Re: pressfit]
Deer Assassin
Non-Typical


Registered: 08/01/03
Posts: 85553
Loc: Kingston Springs

Offline
 Originally Posted By: pressfit
My suggestion would be to use kroil..
ditto
_________________________
Drag Racing

Spending money I dont have

on things I dont need

to impress people I dont know

Top
#2956720 - 09/25/12 10:44 AM Re: first savage problems... [Re: Deer Assassin]
EastTNHunter
10 Point


Registered: 03/08/10
Posts: 2638
Loc: Rhea Co., TN

Offline
 Originally Posted By: Deer Assassin
 Originally Posted By: pressfit
My suggestion would be to use kroil..
ditto


x3

And if the breechplug is stuck, then your ventliner prolly will be, too. The supplied allen wrench is very cheap, so you may want to try a different one when trying to break the ventliner free. Do what the owner's manual says when you get it all straightened out: shoot 2-3 shots when clean, then break it free and retighten to break the carbon bond that causes it to seize.

Top
#2956807 - 09/25/12 11:58 AM Re: first savage problems... [Re: EastTNHunter]
Southern Sportsman
6 Point


Registered: 09/18/11
Posts: 868
Loc: West TN

content Online
 Originally Posted By: EastTNHunter
 Originally Posted By: Deer Assassin
 Originally Posted By: pressfit
My suggestion would be to use kroil..
ditto


x3



x4

Top
#2956816 - 09/25/12 12:03 PM Re: first savage problems... [Re: Southern Sportsman]
Rockhound
10 Point


Registered: 04/04/11
Posts: 2668
Loc: Lawrence Co. TN

Offline
I GOT IT!!!! Thanks for the advice guys, i soaked it overnight in wd40. Took it to my local sporting goods store where i bought it and 4 of us got ahold of it and broke it loose. Thats why i buy from them. I might overpay a bit but a big chain store would not have helped me, and to me that goes a long way. Stay tuned im gonna start shooting Saturday im sure there are alot of questions to come \:\)
_________________________
Isaiah 40:31.... Those who wait upon The Lord .....shall renew there strength ......

Top
#2956822 - 09/25/12 12:04 PM Re: first savage problems... [Re: Rockhound]
Rockhound
10 Point


Registered: 04/04/11
Posts: 2668
Loc: Lawrence Co. TN

Offline
And btw the vent liner was so loose i unscrewed it with my fingers no wrench needed
_________________________
Isaiah 40:31.... Those who wait upon The Lord .....shall renew there strength ......

Top
#2956832 - 09/25/12 12:08 PM Re: first savage problems... [Re: Rockhound]
Rubberduck270
10 Point


Registered: 11/01/10
Posts: 2563
Loc: Lawrence Co.

Offline
Lawson's?
_________________________
Smokeless Muzzleloading: It ain't your Grampa's flintlock

Top
#2956921 - 09/25/12 01:14 PM Re: first savage problems... [Re: Rubberduck270]
EastTNHunter
10 Point


Registered: 03/08/10
Posts: 2638
Loc: Rhea Co., TN

Offline
Sweet!
Top
#2956940 - 09/25/12 01:29 PM Re: first savage problems... [Re: Rubberduck270]
Rockhound
10 Point


Registered: 04/04/11
Posts: 2668
Loc: Lawrence Co. TN

Offline
 Originally Posted By: Rubberduck270
Lawson's?


Yessir, they really aint high though compared to anyone else and they are 5 min from home. There cheaper than alot of places
_________________________
Isaiah 40:31.... Those who wait upon The Lord .....shall renew there strength ......

Top
#2957086 - 09/25/12 02:56 PM Re: first savage problems... [Re: Rockhound]
Rubberduck270
10 Point


Registered: 11/01/10
Posts: 2563
Loc: Lawrence Co.

Offline
 Originally Posted By: Rockhound
Yessir, they really aint high though compared to anyone else and they are 5 min from home. There cheaper than alot of places


Good people down there. I'll agree they are a little high on some stuff but you don't have to wait for it to ship and they are very knowledgeable and will steer you in the right direction.
_________________________
Smokeless Muzzleloading: It ain't your Grampa's flintlock

Top
#2957127 - 09/25/12 03:34 PM Re: first savage problems... [Re: Rubberduck270]
scn
14 Point


Registered: 02/05/03
Posts: 9331
Loc: Brentwood, TN US

content Online
Savage seems to have a problem with this. On my last Savage I went to take the breech plug out to do the initial cleaning. It would not budge. I got some help, and we still couldn't break it loose. I ended up having to send it back to Savage so they could check to see if they had cross-threaded the plug when they installed it.

My guess is they are doing a half-azzed job of lubing the plug and then installing with an air wrench. It was a major pain to deal with, but a great rifle after the initial issue.
_________________________
Life is too short to fish with a dead cricket.

Top
Page all of 2 12>


Moderator:  RUGER, Tennessee Todd, Bobby G, Unicam, CBU93, stretch, Kimber45, Kirk, Crappie Luck 
Hop to:
Top Posters
4104403
RUGER
85553
Deer Assassin
64250
BSK
59560
Crappie Luck
51368
spitndrum
Newest Members
Fish N Hunt, bowednlazy, ULTIMATE TARGETS, Philski, Original Booger
13295 Registered Users
Who's Online
81 registered (Bigg E, GOODWIN, Blackdog, Beekeeper, sees all, memfuzz, 12 invisible) and 134 anonymous users online.
Forum Stats
13295 Members
42 Forums
85670 Topics
1035274 Posts

Max Online: 788 @ 11/11/13 08:06 PM
Moon Phase
CURRENT MOON
April
Su M Tu W Th F Sa
1 2 3 4 5
6 7 8 9 10 11 12
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28 29 30
Forum Donations
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!

TN Burn Safe

Generated in 0.217 seconds in which 0.001 seconds were spent on a total of 14 queries. Zlib compression enabled.