#2944921 - 09/16/12 01:00 AM
Pse cam help please
|
southernhunter
8 Point
Registered: 09/08/10
Posts: 1228
Loc: alabama
|
Offline
|
|
I took my bow and had a new string built for it. I also replaced the cable slide with the new red Pse slide . Well it put my cable very close to my vanes to the point I am pretty sure they where making contact . The bow shop told me if I had problems just turn the odd vane out to clear . But I didn't like that because it put the vane smushed against my face . So I decided to replace the slide with a hyper guide cable slide. Now I have plenty of room but it's pulling my string over at a steep angle , and ( maybe) causing cam lean. So I adjusted the cable slide rod. But to get room for the string and vanes not to contact . I have to adjust the slide over pretty good bit and the cable is coming of the wheel at a pretty step angle. I can't remember how it was with the factory slide . So here's my question . How much angle Is ok before I have to worry about cam lean and other issues ? I have it adjust with about a 1/8 clearance right now between the string and vanes , it's a Pse xs bow madness . Thanks
|
|
Top
|
|
|
|
|
#2944968 - 09/16/12 07:32 AM
Re: Pse cam help please
[Re: southernhunter]
|
Radar
Non-Typical
Registered: 08/19/01
Posts: 30916
Loc: Kansas City, Mo.
|
|
Offline
|
|
I have about a1/4 to 3/8" clearance between my vanes and cables on my PSE's . Vane contact with the cables would have more effect on arrow flight than a little cam lean , assuming that you have any lean . I twist my harness on either side to compensate for can lean at the idler wheel end on single cam bows .
_________________________
|
|
Top
|
|
|
|
Moderator: RUGER, Tennessee Todd, Tennessee Todd, Bobby G, Unicam, CBU93, stretch, Cuttin Caller
|
12110 Members
38 Forums
115939 Topics
1412076 Posts
Max Online: 756 @ 11/20/12 09:10 AM
|
|
|
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!
|
|
|
