Tndeer Logo

Page 1 of 3 123>
Topic Options
#281261 - 06/28/07 06:26 PM SO MAD!!! Project Rifle Damaged
Model70Man
12 Point


Registered: 09/30/05
Posts: 6554
Loc: Knoxville, TN

Offline
I got a call from the gunshop today saying my trigger job was finished. I'm excitedly anticipating holding, shouldering, and squeezing the trigger all day long. I get to the shop and they hand me my rifle and the first thing I notice is a gouge on my Zeiss Conquest. I don't even check the trigger at that point. I begin to inspect the wood and lo and behold my stock is scratched all to he77 on the forend and on the right side of the action. I've never been so mad in my life. The rifle has never even been shot. I wouldn't care if I had made those marks, well I would, but you would expect that when you take your rifle in for smith work, you would get it back in the same shape you brought it in. They did, however, try to make it right. They are going to replace my scope with a new one and repair the blemishes. So I won't have it again for a couple more weeks.

The trigger job was absolutely perfect. Now if I could just shoot the thing!
_________________________
Winchester Model 70 Stainless Left Hand .270 Win.
McMillan Edge
Talley Lightweights
Zeiss Victory Varipoint #60 Illuminated

Top
#281276 - 06/28/07 06:42 PM Re: SO MAD!!! Project Rifle Damaged [Re: Model70Man]
paincave_2000
10 Point


Registered: 08/21/05
Posts: 2515
Loc: Bedford Co.

Offline
Bummer dude.
_________________________
State Mental Health Department certified 5150.

Top
#281286 - 06/28/07 06:49 PM Re: SO MAD!!! Project Rifle Damaged [Re: paincave_2000]
BucknBass
TnDeer Old Timer
10 Point


Registered: 09/27/99
Posts: 2843
Loc: Bartlett, TN USA

Offline
That sucks. Did thery own up to it when you got there or did you hae to point it out to them. If there was that much damage they knew about it.
_________________________
NRA Life Member

Top
#281288 - 06/28/07 06:52 PM Re: SO MAD!!! Project Rifle Damaged [Re: BucknBass]
tndrbstr
16 Point


Registered: 10/06/05
Posts: 12157
Loc: knox co tn

Offline
Gee, I wonder what they would of done if you hadn't seen the damage? or worse yet if someone else had picked the gun up that didn't know that the scratches weren,t supposed to be there? Makes you wonder...
Top
#281682 - 06/29/07 12:14 AM Re: SO MAD!!! Project Rifle Damaged [Re: BucknBass]
Tiny
16 Point


Registered: 02/09/02
Posts: 17732
Loc: Knoxville

Offline
Dittos BucknBass
_________________________
Have a Great Day and God Bless

God Answers Prayers Yes No or Not Yet









Top
#281826 - 06/29/07 07:40 AM Re: SO MAD!!! Project Rifle Damaged [Re: Tiny]
buzzr46
12 Point


Registered: 05/20/06
Posts: 7358
Loc: Stoney Creek

Offline
I'd be pi$$ed. What were they doing, playing catch with it?
_________________________
Faith makes things possible, not easy

Top
#281832 - 06/29/07 07:47 AM Re: SO MAD!!! Project Rifle Damaged [Re: buzzr46]
Cull Buck Hunter
8 Point


Registered: 12/16/05
Posts: 1912
Loc: Cleveland,TN

Offline
Unprofessional!
_________________________
All hail the Barnes TSX bullet!!!
Buy US made products, your job may be next!

Top
#281866 - 06/29/07 08:28 AM Re: SO MAD!!! Project Rifle Damaged [Re: Cull Buck Hunter]
rvs9
8 Point


Registered: 08/23/02
Posts: 1476
Loc: ChattaVegas

Offline
Curious to know if they explained to you what had happened to cause that amount of damage?
_________________________
In dog years - I would be dead.

Top
#281870 - 06/29/07 08:31 AM Re: SO MAD!!! Project Rifle Damaged [Re: Cull Buck Hunter]
WestTn Huntin'man
16 Point


Registered: 11/19/06
Posts: 11909
Loc: Benton Co.

Offline
The right thing to do would of been to tell ya before you came down.It should of been made right before you ever got there.
They should discount the trigger job, For the time,trouble,pain and suffering
_________________________
Proverbs 3:27 Whenever you possibly can, do good to those who need it

Top
#281873 - 06/29/07 08:33 AM Re: SO MAD!!! Project Rifle Damaged [Re: rvs9]
vonb
6 Point


Registered: 12/01/05
Posts: 797
Loc: TN

Offline
Yup, that would pi$$ed me off. I had a bedding and trigger job done by a local 'smith in Franklin and told him I was picky about the looks of my guns...Especially when it comes to buggered up/stripped screws and told him so. The gun came back with rub marks on the stock and a nasty bedding job that looks like an amateur did it. Needless to say I'll only have reputable 'smiths work on my stuff from now on. There's no excuse for this...
Top
Page 1 of 3 123>


Moderator:  RUGER, gtk, Bobby G, Unicam, CBU93, stretch, TurkeyBurd, Kimber45, Kirk, Crappie Luck 
Hop to:
Top Posters
4104403
RUGER
85553
Deer Assassin
64250
BSK
59560
Crappie Luck
51368
spitndrum
Newest Members
Fish N Hunt, bowednlazy, ULTIMATE TARGETS, Philski, Original Booger
13295 Registered Users
Who's Online
99 registered (worldslam09, Southern Sportsman, REN, RodBone75, BamaProud, krazykarl_13, 15 invisible) and 155 anonymous users online.
Forum Stats
13295 Members
42 Forums
85675 Topics
1035358 Posts

Max Online: 788 @ 11/11/13 08:06 PM
Moon Phase
CURRENT MOON
April
Su M Tu W Th F Sa
1 2 3 4 5
6 7 8 9 10 11 12
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28 29 30
Forum Donations
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!

TN Burn Safe

Generated in 0.202 seconds in which 0.001 seconds were spent on a total of 15 queries. Zlib compression enabled.