Tndeer Logo

Page all of 2 12>
Topic Options
#1221597 - 03/06/09 08:47 PM Flouracarbon for flippin.........
stretch Moderator
8 Point


Registered: 11/06/02
Posts: 1892
Loc: pinson, tn, usa

Offline
Been thinkin bout changing to flouracarbon line on my flippin stix. Wanted to get some opinions here. What say ya'll?
_________________________
Life is not about how fast you run or how high you climb but how well you bounce!

Top
#1221822 - 03/06/09 10:12 PM Re: Flouracarbon for flippin......... [Re: stretch]
moondawg
16 Point


Registered: 06/19/02
Posts: 19460
Loc: Millington, TN

Offline
Why the change to flouracarbon? What size/weight line are you using for your flipping rods?

Me personally, I have it on my spinning reels. I've heard that it is not easily seen underwater. That's why I use it. I don't see any reason why you could'nt use it on flipping rods, just get the weight/size you need.
_________________________
Don't look down, BE down!--Turkeyburd (Prevous 2012)

Top
#1222122 - 03/07/09 04:52 AM Re: Flouracarbon for flippin......... [Re: moondawg]
tophat
14 Point


Registered: 06/27/01
Posts: 8065
Loc: Springville tennessee

Offline
I use spider wire for my flipping but i have a few friends that use it and love it.
Top
#1222127 - 03/07/09 05:06 AM Re: Flouracarbon for flippin......... [Re: tophat]
Radar
Non-Typical


Registered: 08/19/01
Posts: 31209
Loc: Kansas City, Mo.

Offline
I love flourocarbon for flippin' I have been using it for flipping and on my main line on carolina rigs.
It has less stretch and is more abrasion resistant than mono. The only thing I don't like to use it for is on spinning reels , because it has allot of memory. On baitcasting reels it works fine for me.
Some guys use the lighter line sizes for crankbaits because the sink rate gets the crankbaits down a little deeper.
_________________________

Top
#1222310 - 03/07/09 08:42 AM Re: Flouracarbon for flippin......... [Re: Radar]
B.D.
8 Point


Registered: 03/24/08
Posts: 1484
Loc: Hendersonville TN

Offline
Fluorocarbon ought to work well on a flippin stick. Low stretch and abrasion resistance will be good. The superbraid lines will get you these same benefits, but fluoro has lower visibility.

One caution - I don't use fluoro on baitcasting rods where I will be making a lot of long casts. I put fluoro on a couple of my saltwater rods and I hated it. Fluoro is heavier than mono, and on a long cast, the extra momentum will make it backlash a lot more.

But for flippin, long casts aren't required, so it shouldn't be a problem.

bd

Top
#1222633 - 03/07/09 02:13 PM Re: Flouracarbon for flippin......... [Re: B.D.]
Radar
Non-Typical


Registered: 08/19/01
Posts: 31209
Loc: Kansas City, Mo.

Offline
 Originally Posted By: Brian Dunigan
Fluorocarbon ought to work well on a flippin stick. Low stretch and abrasion resistance will be good. The superbraid lines will get you these same benefits, but fluoro has lower visibility.

One caution - I don't use fluoro on baitcasting rods where I will be making a lot of long casts. I put fluoro on a couple of my saltwater rods and I hated it. Fluoro is heavier than mono, and on a long cast, the extra momentum will make it backlash a lot more.

But for flippin, long casts aren't required, so it shouldn't be a problem.

bd
I use it on my carolina rigs with baitcasters and have never had a problem with backlashes .
_________________________

Top
#1222809 - 03/07/09 04:37 PM Re: Flouracarbon for flippin......... [Re: Radar]
B.D.
8 Point


Registered: 03/24/08
Posts: 1484
Loc: Hendersonville TN

Offline
Okay...

Lots of variables - you could be using lighter line, or a reel with a smaller spool than my saltwater gear, or maybe you keep your "cast control" knob on your reel cranked down tighter than I like to. Maybe your carolina rigs cast different than big plugs and spoons I'm throwing in the salt. Who knows.

For some people, the increased backlash with fluoro line a problem. Your mileage may vary.

bd

Top
#1222872 - 03/07/09 06:02 PM Re: Flouracarbon for flippin......... [Re: B.D.]
Radar
Non-Typical


Registered: 08/19/01
Posts: 31209
Loc: Kansas City, Mo.

Offline
 Originally Posted By: Brian Dunigan
Okay...

Lots of variables - you could be using lighter line, or a reel with a smaller spool than my saltwater gear, or maybe you keep your "cast control" knob on your reel cranked down tighter than I like to. Maybe your carolina rigs cast different than big plugs and spoons I'm throwing in the salt. Who knows.

For some people, the increased backlash with fluoro line a problem. Your mileage may vary.

bd



.... or maybe I have a trained thumb. \:\)
_________________________

Top
#1223192 - 03/07/09 09:42 PM Re: Flouracarbon for flippin......... [Re: Radar]
MFBAB
10 Point


Registered: 01/08/08
Posts: 2997
Loc: Memphis, TN

Offline
I like it for flipping, I switched from a palomar to a trilene though, the flouro will cut itself sometimes with a palomar. Also, that kvd line conditioner makes flouro handle much better, I think it's more of a line memory thing than a thumb thing:)
_________________________
Missed it by that much....

Top
#1225472 - 03/09/09 09:31 AM Re: Flouracarbon for flippin......... [Re: Radar]
B.D.
8 Point


Registered: 03/24/08
Posts: 1484
Loc: Hendersonville TN

Offline
 Originally Posted By: Scott61

.... or maybe I have a trained thumb. \:\)


Yes. It is because you are a better caster than I am. I bow at your awesomeness. Harder than flycasting and all that.

Better?

bd


Edited by Brian Dunigan (03/09/09 09:57 AM)

Top
#1226040 - 03/09/09 04:07 PM Re: Flouracarbon for flippin......... [Re: B.D.]
Radar
Non-Typical


Registered: 08/19/01
Posts: 31209
Loc: Kansas City, Mo.

Offline
 Originally Posted By: Brian Dunigan
 Originally Posted By: Scott61

.... or maybe I have a trained thumb. \:\)


Yes. It is because you are a better caster than I am. I bow at your awesomeness. Harder than flycasting and all that.

Better?

bd


I was joking . Hence the smilie face . ;\) Don't get your panties in a wad.
_________________________

Top
#1226042 - 03/09/09 04:10 PM Re: Flouracarbon for flippin......... [Re: Radar]
B.D.
8 Point


Registered: 03/24/08
Posts: 1484
Loc: Hendersonville TN

Offline
 Originally Posted By: Scott61

I was joking .


Likewise. \:\) \:\)

Top
#1226551 - 03/09/09 08:33 PM Re: Flouracarbon for flippin......... [Re: B.D.]
ol 'rube
8 Point


Registered: 01/26/07
Posts: 1828
Loc: goodlettsville

Offline
braid in flippin cant beat it
_________________________
patience will always payoff !!!

Top
Page all of 2 12>


Moderator:  RUGER, Unicam, CBU93, stretch, Bobby G, Cuttin Caller, Kimber45, Mrs.Unicam, Crappie Luck, gtk 
Hop to:
Top Posters
4106599
RUGER
88400
Deer Assassin
65979
BSK
62020
Crappie Luck
51392
spitndrum
Newest Members
yarddawg54, schiesser, bigdoc, Bggamehunter, willy2763
13605 Registered Users
Who's Online
5 registered (Rifle06, old guy, ruthunter, mjac, 1 invisible) and 77 anonymous users online.
Forum Stats
13605 Members
43 Forums
100233 Topics
1180121 Posts

Max Online: 788 @ 11/11/13 08:06 PM
Moon Phase
CURRENT MOON
December
Su M Tu W Th F Sa
1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31
Forum Donations
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!

TN Burn Safe

Generated in 0.006 seconds in which 0.001 seconds were spent on a total of 14 queries. Zlib compression enabled.