Tndeer Logo

Page 1 of 1 1
Topic Options
#1142250 - 01/22/09 12:24 PM TiminTN and others: Patterning Questions
Wes Parrish
16 Point


Registered: 06/12/02
Posts: 19012
Loc: Knoxville-Dover-Union City, TN

Offline
1) Do you believe it's worth the effort to clean your bore between shots, and if so, how do you do it?

2) How much do you typically see pattern centers vary, from shot to shot?

3) When you change choke tubes, then come back to a prior choke tube, does this effect your pattern center relative to the last time you used that particular choke tube? (My thinking on this last question is that if you screwed the tube in just a little more or less, you could shift your pattern center.)

Top
#1142275 - 01/22/09 12:38 PM Re: TiminTN and others: Patterning Questions [Re: Wes Parrish]
Grizzly Johnson Moderator
Team Grizzly
16 Point


Registered: 10/07/08
Posts: 15071
Loc: Tennessee

Offline
I don't clean the inside of the barrel unless it's been raining out or just a couple of times during the season. I do clean them right before season opens and after a season closes where I would be using it also. It's not very practical that a hunter would carry a cleaning kit in the woods to clean between shots, shoot it like you would while hunting with it.

Mine doesn't change much/if at all as far as I can tell. Using a scope/red dot I just center the pattern with the cross hairs/dot and that's been it for me.

It shouldn't change anything, and you should be tightening the choke tube down all the way and then periodically checking it to make sure it is staying tight.
_________________________
Criminals thrive on the indulgence of society's understanding.

Your compassion is a weakness your enemies will not share.

Top
#1142300 - 01/22/09 12:50 PM Re: TiminTN and others: Patterning Questions [Re: Grizzly Johnson]
Hawk
TnDeer Old Timer
12 Point


Registered: 09/03/99
Posts: 6578
Loc: west tenn.

Offline
Wes..Pretty good reading on Nitro's site

http://www.nitrocompany.com/pattern.htm
_________________________
"Sometimes it's not enough to know what things mean, sometimes you have to know what things don't mean."

Top
#1142366 - 01/22/09 01:44 PM Re: TiminTN and others: Patterning Questions [Re: Wes Parrish]
Buckblaster
10 Point


Registered: 10/04/06
Posts: 3889
Loc: bradley county,TN/Lancaster,SC

Offline
 Originally Posted By: Wes Parrish
1) Do you believe it's worth the effort to clean your bore between shots?


When you change choke tubes, then come back to a prior choke tube, does this effect your pattern center relative to the last time you used that particular choke tube?


1.) No

2.) As long as it is tight, your fine.


Edited by Buckblaster (01/22/09 01:45 PM)
_________________________

Turn your caps lock of goober, we can hear you.

Top
#1144662 - 01/23/09 06:54 PM Re: TiminTN and others: Patterning Questions [Re: ]
TiminTN
12 Point


Registered: 06/18/00
Posts: 6327
Loc: Memphis,Tennessee U.S.A.

Offline
If you are hard core about it then cleaning between shots will give you the highest percentages. I am not that hard core.

The center of the pattern will always drift without optics. There is no way anyone can shoot this much recoil with beads off a bench and keep the shots centered. I can do it much easier with optics and a sweat shirt folded as extra padding when testing 15 to 20 rounds of 2 to 2 1/4 OZ loads.

Drifting patterns are not the only drawback, but many barrels do not shoot to point of aim at all. The sole reason I went with optics.

I want my research, and bruised shoulder, to be glorified by KNOWING that gobblers head is right in the middle of the swarm I am about to unleash.
_________________________
You cannot argue with STUPID

Top
#1154556 - 01/29/09 06:58 PM Re: TiminTN and others: Patterning Questions [Re: ]
Wes Parrish
16 Point


Registered: 06/12/02
Posts: 19012
Loc: Knoxville-Dover-Union City, TN

Offline
 Originally Posted By: renegade50
i actually saw impact changes on the same chokes when i would switch them back and forth and then go back
and i do beleive it was linked to tighten of the choke

That's exactly what I thought was happening last year when I was going back & forth between different choke tubes.

Think I'm just going to experiment with different shells this year, and not remove the turkey choke tube that's in there now.

 Originally Posted By: TiminTN
Drifting patterns are not the only drawback, but many barrels do not shoot to point of aim at all. The sole reason I went with optics.

I want my research, and bruised shoulder, to be glorified by KNOWING that gobblers head is right in the middle of the swarm I am about to unleash.

Main reason I went to optics was because I could no longer clearly see my sighting plane and the target simultaneously. Wish I had gone to optics years ago --- much better period, even for young eyes.

Top
Page 1 of 1 1


Moderator:  RUGER, Bobby G, Unicam, Cuttin Caller, CBU93, stretch, TurkeyBurd, Kimber45, Mrs.Unicam, Crappie Luck, Grizzly Johnson 
Hop to:
Top Posters
4104874
RUGER
86278
Deer Assassin
64800
BSK
60462
Crappie Luck
51375
spitndrum
Newest Members
two1980, Darrenduhl, 2winsrus, jacmac, Smokeymtnbow
13101 Registered Users
Who's Online
113 registered (PinchPoint, wjohnson1983, JAY B, 10takum, Matador, TnBob, 14 invisible) and 165 anonymous users online.
Forum Stats
13101 Members
42 Forums
88842 Topics
1039296 Posts

Max Online: 788 @ 11/11/13 08:06 PM
Moon Phase
CURRENT MOON
July
Su M Tu W Th F Sa
1 2 3 4 5
6 7 8 9 10 11 12
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28 29 30 31
Forum Donations
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!

TN Burn Safe

Generated in 0.219 seconds in which 0.001 seconds were spent on a total of 14 queries. Zlib compression enabled.