Brass and bullet trade thread

[dogsled]

If anyone is interested, there is a guy in Huntsville, AL, isn't a hunter, and not on this forum, but is an avid shooter. He has access to a lot of range pick up brass and a huge stockpile of stuff. As you might expect, he has more of the common brass than more rare stuff. He is open to trades for stuff he can use. I doubt he has any 219 zipper, but plenty of 270 and 30-30.

I connected him with someone on here previously for 25-06 and 7mm Rem Mag brass and after that he asked me to post a message to the general audience so here it is. I have traded with him many times and never had an issue.

Anyone interested PM me and I will shoot you his email address.

 

[MUP]

Just kinda odd JPimbo, no need to go away. Stick around and get to be known better. I didn't know I was known nationwide.

 

[JPimbo]

Just kinda odd JPimbo, no need to go away. Stick around and get to be known better. I didn't know I was known nationwide.

I thought it was a good post, concise and to the point. Yeah, one of the first on google for a very specific search- your forum and this thread. So I just poked my head in to see. I guess that doesn't happen very often and a guy from calif. after all- shocking the local residents.

maybe your right @MUP but it wasn't like I was joining the forum. Just asking a question. I didn't even introduce myself, very observant all.

 

[MUP]

I thought it was a good post, concise and to the point. Yeah, one of the first on google for a very specific search- your forum and this thread. So I just poked my head in to see. I guess that doesn't happen very often and a guy from calif. after all- shocking the local residents.

maybe your right @MUP but it wasn't like I was joining the forum. Just asking a question. I didn't even introduce myself, very observant all.

Welcome to the site.

 

[JPimbo]

 

[Omega]

I thought it was a good post, concise and to the point. Yeah, one of the first on google for a very specific search- your forum and this thread. So I just poked my head in to see. I guess that doesn't happen very often and a guy from calif. after all- shocking the local residents.

maybe your right @MUP but it wasn't like I was joining the forum. Just asking a question. I didn't even introduce myself, very observant all.

You have to realize that there have been a number of scammers lately, here and other gun/hunting sites as well that have given many of us reason to suspect newcomers, especially when they don't introduce themselves and are out of towners on a local forum. Not that we don't have out of towners mind you, we do, but they have ties to TN, and participate in our other discussions as well. Hang around, get to know us and the site, if you are a hunter, fisherman, or any kind of outdoor enthusiast you may like what you find.

 

[EastTNHunter]

You meaning that towards me? It's definitely not my first post on the forum, but is in this thread. I'll be glad to talk on the phone with anyone that is skeptical. Just because I threw up some sought after powders?

I'm definitely not in norcal. Pretty sure scammers don't have a clue where Jonesborough is. I've traded primers with a few people off here before. Met them at the trailblazer.

Nope. Steve covered it

 

[EastTNHunter]

You have to realize that there have been a number of scammers lately, here and other gun/hunting sites as well that have given many of us reason to suspect newcomers, especially when they don't introduce themselves and are out of towners on a local forum. Not that we don't have out of towners mind you, we do, but they have ties to TN, and participate in our other discussions as well. Hang around, get to know us and the site, if you are a hunter, fisherman, or any kind of outdoor enthusiast you may like what you find.

Well said, Omega

 

[MUP]

So how are the politics in NorCal compared to the lower portion of the state? Just curious. You can go to the General Forum and make an introduction post for yourself if you'd like. You'll likely receive a warm welcome.

 

[dizle66]

Looking for 6.5 Grendel brass.

 

[deerslayer472]

Cleaning up the reloading room and have a few things to move.

8lbs h1000, 8lbs varget, 3+ lbs of Reloader 17, 3+lbs of IMR 4227, 90gr Nosler .243 BT, Sierra TGK 64gr .224, Sierra 65gr SBT .224, Lee .38 special/.357 deluxe 4 die set.

Looking for 162gr ELD-M 7mm bullets, ADG 7SAUM brass, H4895, 300 Weatherby mag brads, 300 weatherby magnum dies(preferably redding), CCI BR2.

I'm in Jonesborough.

I've got a set of rcbs 300 weatherby mag dies and 2 boxes of brass believe one is Remington and the other I'd have to look to be sure and 2 boxes of hornady 7 mag 150 grain gmx's for trade

 

[WestTN2288]

Looking for 6.5 Grendel brass.

I just got tired of looked for 6arc brass and found a good recipe for changing 7.62x39 to 6 arc. I think with 6.5 Grendel, it would be even easier since I go 7.62-> 6.5 Grendel -> 6arc. I could share you the details if that would help

 

[EastTNHunter]

Looking for 6.5 Grendel brass.

Easy

6.5 Grendel Brass - Small Rifle - Brass Cases

 

[deerslayer472]

If anyone is interested, there is a guy in Huntsville, AL, isn't a hunter, and not on this forum, but is an avid shooter. He has access to a lot of range pick up brass and a huge stockpile of stuff. As you might expect, he has more of the common brass than more rare stuff. He is open to trades for stuff he can use. I doubt he has any 219 zipper, but plenty of 270 and 30-30.

I connected him with someone on here previously for 25-06 and 7mm Rem Mag brass and after that he asked me to post a message to the general audience so here it is. I have traded with him many times and never had an issue.

Anyone interested PM me and I will shoot you his email address.

I'm the one that got the 7mm Remington mag brass from him got it the next day all polished like new. If you call him be prepared he is a talker lol. Definitely a stand up guy.

 

[WestTN2288]

Does anybody have any WMA or WCC 5.56 brass? I have decent sized lots of lc 223, lc 556, pmc 223 I could trade piece for piece. Even have some mixed brass I could trade more in your favor if that interests anyone

 

[cm1021]

I've got a set of rcbs 300 weatherby mag dies and 2 boxes of brass believe one is Remington and the other I'd have to look to be sure and 2 boxes of hornady 7 mag 150 grain gmx's for trade

What would you be interested in trading for?

 

[dogsled]

Does anybody have any WMA 5.56 brass? I have decent sized lots of lc 223, lc 556, pmc 223 I could trade piece for piece. Even have some mixed brass I could trade more in your favor if that interests anyone

I may have, I can check this weekend. Would be interested in the LC223.

 

[deerslayer472]

What would you be interested in trading for?

Reloader 17, 243 Nosler BT. Message me and we will talk about it I don't have enough points yet to message you.

 

[rodeojoe]

I am wanting to trade for some Winchester 308 caliber, 147 grain FMJ bullets.
Let me know what you have and what you are looking for.

 

[dogsled]

I also have a bunch of 30-30 SP bullets 150 and 170 gr.

I would be interested in these if they are safe for tubular mags. I have some .284 bullets various weights, some dies, charge bars for Mec reloaders, and lots of misc stuff, gun parts, holsters, etc I can offer. I will PM you.